Description
If you shoot a Desert Eagle in .50 AE, you already know factory ammo is pricey and not always easy to track down. This RCBS 3-die set gives you everything you need on the die side to roll your own straight-wall .50 Action Express ammo, and it's built to the same tolerances RCBS has been known for over the years. The set is machined from steel, which means it runs on the more affordable side compared to carbide, with the one tradeoff being that you'll want to lube your cases before sizing.
What the RCBS 3-Die .50 AE Set Does
The set breaks the job into three stages. The Sizer Die resizes the fired brass back to spec and knocks out the spent primer with its decapping unit in a single stroke. The Expander Die opens the case mouth to the right diameter and adds a touch of flare, or bell, so your bullet seats and feeds cleanly instead of shaving lead or catching on the edge. The Seater Die then presses the bullet to your chosen depth and finishes with a taper crimp, which is the preferred crimp style for a rimless, semi-auto cartridge like the .50 AE.
Why a Taper Crimp Matters on the .50 AE
Because the .50 Action Express headspaces on the case mouth, a taper crimp keeps that mouth square and consistent for reliable chambering in a Desert Eagle. A roll crimp can roll the mouth over and throw off headspacing, so RCBS spec'd this set the right way for the cartridge. The seater plug handles common bullet profiles loaded for the round, giving you repeatable seating depth batch after batch.
These dies thread into any standard 7/8-14 single stage or progressive press, so they'll drop right into whatever setup you're already running. Keep in mind a shell holder is not part of this kit, so you'll want to grab the correct one for .50 AE separately if you don't have it on the bench already. For anyone feeding a hungry hand cannon, this is a solid, no-nonsense way to take control of your ammo supply.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 22210
- UPC: 076683222107
- Caliber: .50 Action Express
- Set Type: 3-Die Taper Crimp, Full Length
- Die Group: Group B
- Number of Dies: 3
- Die Material: Steel (non-carbide)
- Case Lube Required: Yes
- Thread Size: 7/8-14
- Shell Holder Included: No
- Dimensions: 1.75 x 4.45 x 5.95 in
What’s Included
- Steel Sizer Die with decapping unit
- Expander Die
- Seater Die with taper crimp and bullet seater plug
Frequently Asked Questions
Does the RCBS .50 Action Express die set require case lube?
Yes. Because these are steel dies rather than carbide, you'll need to lube your cases before running them through the sizer. Skipping this step can lead to stuck cases, so a light, even coat of case lube is the way to go.
Is a shell holder included with this RCBS 22210 set?
No, a shell holder is not part of this kit. You'll want to pick up the correct shell holder for the .50 Action Express separately if you don't already have one on your bench.
Why does this set use a taper crimp instead of a roll crimp?
The .50 Action Express headspaces on the case mouth, so a taper crimp keeps that mouth square for consistent chambering in a semi-auto like the Desert Eagle. A roll crimp can roll the case mouth over and affect headspacing, which is why RCBS spec'd this cartridge with a taper crimp seater.
Will these dies fit a standard reloading press?
Yes. The dies use the standard 7/8-14 thread, so they'll thread into any common single stage or progressive press. You can set them up on whatever press you're already running without any special adapters.




Reviews
There are no reviews yet.