Description
The .350 Legend has turned into a go-to round for deer hunters and anyone who likes a hard-hitting straight-wall cartridge, and if you're feeding one you already know factory ammo adds up fast. This RCBS 3-Die Roll Crimp Set gives you everything you need to roll your own .350 Legend, built to the machining tolerances RCBS has been known for since the company more or less wrote the book on handloading dies.
The set keeps sizing and case mouth prep as two separate steps, which is the way RCBS has always approached straight-wall brass. The steel Sizer Die resizes the case back to spec and knocks out the spent primer in one stroke. Worth noting: this is a steel sizer, so your cases need a light coat of case lube before they go in. The Expander Die opens the case neck to the right diameter and puts a slight flare, or bell, on the mouth so bullets start straight without shaving or hanging up. The Seater Die then sets your bullet to depth and applies a roll crimp into the case mouth to lock everything in place.
Why the Roll Crimp Matters on This .350 Legend Set
The roll crimp is the headline feature here. A firm crimp keeps bullets from walking under recoil or from magazine pressure, which matters on a thumper like the .350 Legend. If you're running cannelured bullets or want extra insurance against setback in a semi-auto or bolt gun, that roll crimp seating die does the job in the same stroke as seating.
What You Get With the RCBS .350 Legend 3-Die Set
Everything ships in RCBS's familiar green storage box with instructions and a warranty card, so the dies stay organized and protected on the bench between sessions. One thing to keep in mind is that a shell holder is not included, so if you don't already have the correct one for .350 Legend you'll want to grab it separately. These dies use the standard 7/8-14 thread and drop right into any common single-stage or turret press.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 21904
- UPC: 604544652437
- Model: 3-Die Roll Crimp Set
- Caliber: .350 Legend
- Die Group: Group C
- Product Type: Full Length
- Number of Dies: 3
- Sizer Die: Steel (case lubrication required)
- Crimp Type: Roll crimp
- Thread: 7/8-14
- Storage: Green plastic die box
- Made In: USA
- Shipping Weight: 1.25 lbs
What’s Included
- Steel full-length sizer die with decapping unit
- Expander die (expands and bells case mouth)
- Seater die with roll crimp
- Instructions
- Warranty card
- Green plastic storage box
Frequently Asked Questions
Does the RCBS .350 Legend 3-Die Roll Crimp Set include a shell holder?
No, a shell holder is not included with this set. You'll need the correct RCBS shell holder for .350 Legend, which is the same size used for several other cartridges. If you're new to reloading this round, pick one up alongside the dies so you're ready to go on day one.
Do I need to lubricate my cases with this die set?
Yes. This set uses a steel sizer die rather than carbide, so cases must be lubricated before resizing. A light, even coat of case lube keeps brass from sticking and makes for smooth sizing strokes.
What's the difference between a roll crimp and a taper crimp for .350 Legend?
This set applies a roll crimp, which rolls the case mouth into a bullet's cannelure to really lock it in place and resist movement under recoil. The .350 Legend headspaces on its case mouth, so many handloaders prefer a taper crimp, which RCBS sells as a separate die if you want that option. The roll crimp works well, especially with cannelured bullets, just set it carefully.
Will these dies fit my press?
Yes, they use the industry-standard 7/8-14 thread, so they thread into virtually any common single-stage or turret reloading press. RCBS dies are machined to tight tolerances and adjust easily, which makes dialing in your load straightforward.




Reviews
There are no reviews yet.