Description
The RCBS Legacy 3-Die Roll Crimp Set is purpose-built for the .40-65 Shiloh Sharps using a .408 bullet diameter, one of those classic black powder cartridges that refuses to fade away. It's part of RCBS's Legacy series, which exists specifically to support folks shooting original and reproduction black powder cartridge rifles. If you've been fighting with another brand's dies that won't size your fired brass down enough to drop cleanly into a tight Shiloh chamber, this set is a common fix for exactly that headache.
What the Three Dies in This .40-65 Set Do
The set covers the full straight-wall loading process. The steel full-length sizer die squeezes the case back to spec and de-primes in the same stroke, so you're sizing and knocking out the spent primer at once. The expander die opens the case mouth to the correct diameter and adds a light flare or bell, which makes starting a cast or jacketed bullet far less fussy. The seater die then seats the bullet to your chosen depth and applies a roll crimp into the cannelure or crimp groove, locking the bullet in place for consistent ignition and handling.
Why the Roll Crimp Matters for the .40-65 Shiloh Sharps
A roll crimp is the right call for rimmed, straight-wall rifle rounds like the .40-65, where a firm, rolled case mouth helps hold heavy cast bullets and gives you repeatable pull tension shot to shot. That consistency is a big deal with black powder and cast lead loads, where uniform crimp and neck tension keep your groups tighter on the single-shot bench. Reloaders have praised the sizer die's well-finished, honed interior, which is part of why the brass comes out smooth and ready.
Good to Know Before You Load
Cases need to be lubricated before sizing to keep everything running smooth and avoid stuck cases. These are standard 7/8-14 threaded dies, so they'll thread right into any common single-stage press. One thing to plan for: the shell holder is not included, so grab the correct .40-65 holder separately if you don't already have one on the bench.
Key Specifications
- Manufacturer: RCBS
- MPN / Model: 23304
- UPC: 076683233042
- Series: Legacy
- Cartridge: .40-65 Shiloh Sharps (40-65 WCF)
- Bullet Diameter: .408
- Number of Dies: 3
- Die Types: Full-Length Sizer, Expander, Seater
- Crimp Style: Roll Crimp
- Die Thread: 7/8-14
- Die Material: Steel
- Case Type: Straight-Wall
- Made In: USA
- Shipping Weight: 1.7 lbs
What’s Included
- Full-length steel sizer die with decapping unit
- Expander die for sizing and belling the case mouth
- Seater die with roll crimp and bullet seater plug
Frequently Asked Questions
Does the RCBS .40-65 die set come with a shell holder?
No, the shell holder is not included with this set. You'll need to pick up the correct shell holder for the .40-65 case separately. Most reloaders already have an assortment on hand, but it's worth confirming before your first loading session.
Will these dies size my fired brass down enough for a tight Shiloh Sharps chamber?
That's one of the main reasons people reach for this set. Reloaders have reported it sizes fired brass small enough to chamber cleanly in a Shiloh Sharps when other brands wouldn't. The steel full-length sizer squeezes the case back to proper spec in a single stroke.
Do I need to lubricate my cases with this set?
Yes, cases must be lubricated before running them through the sizer die. Lube keeps everything moving smoothly and helps you avoid a stuck case. A quick wipe of case lube before sizing is all it takes.
What kind of crimp does this .40-65 die set apply?
The seater die applies a roll crimp, which rolls the case mouth into the bullet's crimp groove or cannelure. That's the preferred crimp for rimmed, straight-wall rifle rounds like the .40-65 and works well with heavy cast bullets for consistent neck tension.





Reviews
There are no reviews yet.