Description
The .458 Winchester Magnum is a big-bore workhorse built for dangerous game and heavy hunting, and feeding it quality ammo gets expensive fast. This RCBS 3-Die Roll Crimp Set lets you take over that job yourself, giving you control over your loads while stretching your brass and your budget. RCBS was the company that pioneered the three-die setup for straight-wall rifle and pistol cases, and the design still holds up because it splits sizing and belling into separate operations for cleaner, more consistent results.
What Each Die in the RCBS .458 Set Does
The set works through three steps. The steel Sizer Die full-length resizes the case back to spec and de-primes it in one stroke, though you will want to lube your cases first since this is a non-carbide steel die. The Expander Die opens the case mouth to the correct diameter and adds a slight flare or bell, which makes starting those wide .458 bullets much smoother and helps prevent shaving. The Seater Die then seats the bullet to your chosen depth and applies a roll crimp, which is a big deal on a hard-kicking magnum like this one. That crimp bites into the cannelure and keeps bullets from walking forward under recoil in the magazine.
Fit and Build on the .458 Win Mag Dies
These dies use the standard 7/8"-14 thread, so they drop right into any common single-stage or turret press without adapters. Everything is machined to tight tolerances and hardened to the standard RCBS has been known for over decades, and the set is made in the USA. The whole set stores in the familiar green RCBS box so your dies stay organized and protected on the bench.
Keep in mind this set does not include a shell holder, so you will need the correct one separately. For the .458 Winchester Magnum that is RCBS Shell Holder #4. Pair these dies with good brass, a solid press, and a reliable load manual and you will be turning out stout, accurate big-bore rounds in no time.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 20804
- UPC: 076683208040
- Caliber: .458 Winchester Magnum
- Set Type: 3-Die Roll Crimp Set
- Sizing: Full Length
- Number of Dies: 3
- Sizer Die Material: Steel (case lube required)
- Carbide: No
- Thread Size: 7/8"-14
- Die Group: Group C
- Case Design: Straight Wall
- Country of Origin: USA
- Shell Holder Included: No (uses #4)
What’s Included
- Sizing and Decapping Die
- Expander (belling) Die
- Seater Die with roll crimp and bullet seater plug
- Instructions
- Warranty card
- Plastic storage box
Frequently Asked Questions
Does the RCBS .458 Win Mag die set come with a shell holder?
No, a shell holder is not included with this set. You will need RCBS Shell Holder #4 for the .458 Winchester Magnum, which is sold separately. It is worth grabbing one at the same time so you are ready to load right out of the box.
Do I need to lube my cases with these dies?
Yes. The Sizer Die in this set is hardened steel rather than carbide, so case lubrication is required before resizing. Skipping lube with a steel sizer can cause a case to stick inside the die, so run a light, even coat before you size.
Will this RCBS set fit my reloading press?
It should. The dies use the industry-standard 7/8"-14 thread, which fits virtually all common single-stage and turret presses. No adapters or special hardware are needed.
Why does this .458 set use a roll crimp?
A roll crimp is ideal for a hard-recoiling magnum like the .458 Winchester Magnum. It rolls the case mouth into the bullet's cannelure to lock it in place, which keeps bullets from creeping forward in the magazine under heavy recoil. That consistent crimp also helps with reliable ignition and uniform pressure.



Reviews
There are no reviews yet.