0
0

RCBS 3-Die Roll Crimp Set .44 Mag/.44 Special – Steel – 18608

UPC: 076683186089

$76.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This RCBS 3-Die Roll Crimp Set covers everything you need to load straight-wall .44 Magnum and .44 Special cases from start to finish. The set runs on three separate dies that each handle one job, which keeps your adjustments dialed in and makes the whole process easy to follow. It threads into any standard 7/8-14 single stage or progressive press, so it drops right into most benches without any fuss.

What the RCBS .44 Mag/.44 Special Die Set Does

The steel Sizer Die resizes the case back to spec and knocks out the spent primer in one pull of the handle. The Expander Die opens the case mouth to the right diameter and adds a slight flare, or bell, so your bullet seats straight and the case mouth does not shave lead on the way in. The Seater Die then presses the bullet to depth and applies a roll crimp, rolling the case mouth into the bullet's crimp groove. That roll crimp is exactly what you want for revolver loads, since it helps keep bullets locked in place and fights the bullet jump that heavy magnum recoil can cause under crimping.

Why Reloaders Reach for the RCBS Roll Crimp Set

These are steel dies, which means you will want to lube your cases before running them through the sizer. A light pass of case lube keeps everything sliding smooth and prevents stuck cases. RCBS has been building three-die sets for straight-wall pistol and rifle brass for a long time, and the fit and finish here reflect that history. Whether you are working up accurate .44 Special plinking loads or stout .44 Magnum hunting rounds, this set gives you consistent, repeatable results round after round.

The dies arrive in the familiar RCBS green box and work equally well for new handloaders getting their feet wet and seasoned folks who just want dependable gear that gets the job done.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 18608
  • UPC: 076683186089
  • Caliber: .44 Magnum / .44 Special
  • Die Type: Roll Crimp 3-Die Set
  • Die Material: Steel
  • Dies in Set: 3
  • Case Type: Straight-Wall
  • Thread: 7/8-14
  • Case Lube Required: Yes
  • Shipping Weight: 1.45 lbs

What’s Included

  • Steel Sizer Die with decapping unit
  • Expander Die for case mouth flare/bell
  • Seater Die with roll crimp
  • Instructions

Frequently Asked Questions

Do I need to lube my cases with this RCBS .44 die set?

Yes. Because this is a steel sizer die rather than carbide, you will want to apply a light coat of case lube before running cases through the sizer. The lube keeps everything moving smoothly and helps prevent stuck cases. Just wipe or tumble the lube off your finished brass afterward.

Will this set load both .44 Magnum and .44 Special?

It does. The .44 Special case is simply a shorter version of the .44 Magnum case, so this single set handles both cartridges. You just adjust your seating depth and powder charge to match whichever load you are building.

What is a roll crimp and why does it matter for .44 revolver loads?

A roll crimp rolls the case mouth down into the bullet's crimp groove or cannelure to lock the bullet in place. This is ideal for revolver cartridges like the .44 Magnum because heavy recoil can pull bullets forward in the cylinder, and a solid roll crimp helps keep them seated. The Seater Die in this set applies the crimp while it seats the bullet.

Will these dies fit my press?

These use the standard 7/8-14 thread, so they fit virtually all single stage and progressive presses on the market. You will also need the correct shell holder for the .44 case, which is sold separately if you do not already have one.

Additional information

UPC

076683186089

Manufacturer

Manufacturer Part Number

18608

Shipping Weight

1.45

Reviews

There are no reviews yet.

Be the first to review “RCBS 3-Die Roll Crimp Set .44 Mag/.44 Special – Steel – 18608”