Description
The 7mm PRC has quickly become a favorite among long-range hunters and precision folks who want heavy-for-caliber bullets with manageable recoil, and loading your own is where this cartridge really earns its keep. This RCBS Full-Length Die Set is a two-die kit made specifically for the 7mm PRC bottleneck case, giving you the two tools you need to turn once-fired brass into ammo you can trust. The set pairs a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug.
What the RCBS 7mm PRC Die Set Does on the Press
The full-length sizing die works the outside of the case back down to SAAMI minimum dimensions, de-primes the spent primer, and expands the neck so it's ready to take a bullet. Vent holes in the die let trapped air and excess lube escape, which keeps your cases from getting dinged during the stroke. Headspace is held to minimum tolerances so the case body length stays consistent as you size, which matters a lot when you're chasing repeatable results. The seater die handles the other half of the job with a seater plug and a built-in roll crimper that locks the bullet in place as it's seated.
Built to RCBS Standards
These dies are machined from RCBS proprietary die steel and cut with the standard 7/8-14 thread, so they'll thread right into just about any single-stage or progressive press you're running. RCBS has been turning out reloading gear for decades, and this set carries that same reputation for durability. Everything ships in the familiar green RCBS die box, which doubles as storage to keep your dies protected and organized on the bench.
A Good Match for the 7mm PRC Handloader
The 7mm PRC headspaces off its shoulder instead of a belt, so brass tends to last and stretch less than older magnums. That makes a quality full-length set like this one a smart foundation whether you're working up a hunting load or fine-tuning for the range. Made in the USA.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 28101
- UPC: 604544689686
- Caliber: 7mm PRC
- Die Type: Full-Length Sizing / Bullet Seating
- Number of Dies: 2
- Thread Size: 7/8"-14
- Crimp Style: Roll Crimp
- Material: Proprietary Die Steel
- Shellholder Included: No
- Series: Popular Rifle Cartridges
- Country of Origin: USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die storage box
Frequently Asked Questions
Does the RCBS 7mm PRC die set include a shellholder?
No, a shellholder is not included with this set. You'll need to pick up the correct shellholder separately to match your press and the 7mm PRC case head. Many loaders already have a compatible one on the bench, since several cartridges share head sizes.
Will these dies fit my reloading press?
Yes. The set uses the standard 7/8-14 thread, so it threads into virtually any single-stage or progressive press on the market. That makes it an easy drop-in for RCBS, Lee, Hornady, Lyman, and other common presses.
What does the full-length sizer die actually do?
It resizes the outside of the case back to SAAMI minimum dimensions, de-primes the spent primer, and expands the neck to accept a new bullet. It also holds headspace to minimum tolerances so your case body length stays consistent. Vent holes let trapped air and lube escape to keep cases from getting damaged during sizing.
Is the 7mm PRC a good cartridge to reload for?
It's one of the friendlier modern magnums to handload. Because it headspaces off the shoulder rather than a belt, the brass stretches less and tends to last through more firings than older belted magnums. That translates to fewer trimming headaches and solid case life, which reloaders appreciate.




Reviews
There are no reviews yet.