Description
The .22 GT has carved out a real following in the precision and PRS world, and for good reason. It's a necked-down 6mm GT that pushes .224 bullets fast while treating your barrel kindly, which is exactly what competitors want out of a cartridge. If you're loading for one, this RCBS two-die set covers the two jobs that matter most: getting fired brass back into shape and seating a bullet straight and consistent.
What the RCBS .22 GT Die Set Does on the Press
This is a traditional two-die setup intended for bottleneck cases. The full-length sizer runs an expander-decapping unit, so in one pull of the handle it works the outside of the case, knocks out the spent primer, and opens the neck back up to take a bullet. The sizer brings brass to SAAMI minimum dimensions, and the die is vented so trapped air and excess lube don't dent or buckle your cases. Headspace is held tight to keep from stretching the case body during sizing, which is part of why RCBS dies have a reputation for long brass life.
Seating and Crimping with the .22 GT Set
The seater die uses a bullet seater plug and has a built-in roll crimp, so you can seat and crimp in the same motion if your load calls for it. For most precision .22 GT loads you'll likely back the crimp out and run it as a straight seater, which this die handles just fine. If you want micrometer adjustment and a bushing-style sizer, that's RCBS's MatchMaster line, but for everyday handloading this standard set gets the job done without fuss.
Why the RCBS 24001 Earns Bench Space
RCBS has been machining dies since 1943, and these are designed, machined, and assembled in the USA from their proprietary die steel. They use the industry-standard 7/8"-14 thread, which means they'll thread right into nearly any single-stage or progressive press, whether it's RCBS, Hornady, Lee, or something else on your bench. It ships in the familiar green die box to keep everything protected between loading sessions.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 24001
- UPC: 850070830638
- Caliber: .22 GT
- Die Type: Full-Length 2-Die Set
- Dies Included: Full-Length Sizer, Bullet Seater
- Thread: Standard 7/8"-14
- Shell Holder: #10
- Material: Proprietary Die Steel
- Crimp: Built-in Roll Crimp (seater die)
- Country of Origin: Made in USA
- Shipping Weight: 1.138 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimp
- Green die storage box
Frequently Asked Questions
What dies come in the RCBS .22 GT set?
This is a two-die set that includes a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer resizes the case, removes the spent primer, and opens the neck in one stroke. The seater also has a built-in roll crimp if your load calls for it.
Will the RCBS 24001 die set fit my press?
Yes. These dies use the industry-standard 7/8"-14 thread, so they'll screw into nearly any single-stage or progressive press, including RCBS, Hornady, Lee, and others. You'll just need the correct shell holder, which for .22 GT is a #10.
Is a shell holder included with the .22 GT die set?
No, the shell holder is not part of this two-die set and is sold separately. For the .22 GT you'll want an RCBS #10 shell holder to fit the case head. It's worth grabbing one at the same time so you're ready to load right away.
How is this different from the RCBS MatchMaster .22 GT die set?
This standard set uses a conventional full-length sizer and a seater with a bullet seater plug, which is plenty for most handloading. The MatchMaster line steps up to an interchangeable neck bushing sizer and a micrometer seating die for competition-level neck tension control and repeatable seating depth. If you're after everyday precision without the extra cost, this set is the practical choice.




Reviews
There are no reviews yet.