0
0

RCBS Full Length Die Set – 6.5 Weatherby RPM | 2-Die Set 22501

UPC: 604544665062

$96.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6.5 Weatherby RPM is a cartridge that rewards a careful handloader, and this RCBS two-die set gives you the tools to feed it right. You get a Full-Length Sizer Die paired with an Expander-Decapping Unit, plus a Seater Die with a bullet seater plug and a built-in roll crimper. In practice, that means you can take fired brass, bring it back to spec, knock out the spent primer, open the neck for a fresh bullet, then seat and crimp with the same two dies. For a cartridge that runs a 130 to 140 grain pill north of 3,000 fps, clean, consistent case prep is what keeps your groups tight and your brass lasting.

What the RCBS 6.5 Weatherby RPM Dies Do on the Press

The Full-Length Sizer brings each case to SAAMI minimum cartridge dimensions, sizing the outside of the case, de-priming, and expanding the neck to take the next bullet. Headspace is held to minimum tolerances so the case body length stays put during sizing, which matters for a non-belted case like the RPM that headspaces off the shoulder. The die is vented to keep trapped air and extra lube from denting or buckling a case on the downstroke, a small touch that saves brass over a long loading session.

Seating and Crimping with the RCBS RPM Die Set

The Seater Die handles the back half of the job. Its bullet seater plug sets your seating depth, and the built-in roll crimper locks the bullet in place as it's seated for a tight, repeatable hold. That crimp is handy for hunting loads that ride in a magazine and take some recoil before they fire.

Fit and Build of the RCBS Full Length Die Set

Both dies are machined from RCBS proprietary die steel and cut with the standard 7/8-14 thread, so they thread right into any common single-stage or turret press. Everything ships in the familiar green RCBS die box, which keeps the set organized on the bench between loading sessions.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 22501
  • UPC: 604544665062
  • Caliber: 6.5 Weatherby RPM
  • Die Type: Full Length Sizing / Bullet Seating
  • Dies in Set: 2
  • Die Series: Bottleneck Rifle Cartridges (Group D)
  • Thread Pattern: 7/8-14
  • Material: Proprietary Die Steel
  • Packaging: Green Die Box
  • Length: 5.95 in
  • Shipping Weight: 1.34 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with bullet seater plug and roll crimper
  • Green RCBS die storage box

Frequently Asked Questions

What comes in the RCBS 6.5 Weatherby RPM die set?

It's a two-die set made up of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a bullet seater plug and a built-in roll crimper. The sizer resizes, de-primes, and expands the neck, while the seater sets depth and crimps. Both dies arrive in the green RCBS die box.

Will these dies fit my reloading press?

Yes. The dies use the standard 7/8-14 thread, which is the common size for single-stage and turret presses from RCBS and most other brands. You'll still need the correct shell holder for the 6.5 Weatherby RPM case head, which is sold separately.

Does the RCBS RPM seater die crimp the bullet?

It does. The Seater Die has a built-in roll crimper that secures the bullet at the same time it's seated. That's a nice feature for hunting ammo that cycles through a magazine and needs to hold up under recoil.

Is a full-length sizing die a good choice for the 6.5 Weatherby RPM?

For most handloaders, yes. Full-length sizing brings the whole case back to spec, which keeps feeding reliable in a bolt gun and is forgiving if you shoot the same brass across different rifles. Since the RPM headspaces off its shoulder, this die holds headspace to minimum tolerances so your case body length stays consistent.

Additional information

UPC

604544665062

Manufacturer

Manufacturer Part Number

22501

Caliber/Gauge

6.5 Weatherby RPM

Length

5.9500

Product Type

FULL LENGTH

Shipping Weight

1.34

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set – 6.5 Weatherby RPM | 2-Die Set 22501”