Description
If you're loading 9mm Luger on a single-stage or progressive press, this RCBS set covers the full cycle in three dies. It includes a carbide sizer die with a decapping unit, an expander die that opens and bells the case mouth for smooth bullet feeding, and a seater die that seats the bullet and applies a taper crimp. That taper crimp matters on 9mm because the cartridge headspaces off the case mouth, so you want to close the bell back down without digging a roll crimp into the case.
RCBS pioneered the 3-die approach for straight-wall pistol and rifle cases, and the big advantage is that sizing and belling happen in separate steps. That gives you cleaner, more consistent results and makes it easy to dial in each operation on its own. The dies themselves are machined and polished steel, built to the kind of tolerances RCBS is known for.
What the Carbide Sizing Ring Does for You
The carbide sizing ring is the real workhorse here. It's extremely hard and slick, so you can skip the case lube entirely and you don't have to clean brass before sizing. For anyone running big batches of range brass, that's a serious time saver and it pretty much ends the headache of stuck cases in straight-wall brass.
Fitting the RCBS 20515 Into Your Setup
This is a standard 7/8-14 threaded die set, so it drops into any common reloading press. It's a Group B set, and beyond standard 9mm Luger it also works with related cases like 9×21 and 9×23. Everything ships in a plastic storage case to keep the dies organized and protected on the bench between sessions. It's a straightforward, dependable choice for building accurate, affordable 9mm ammo at home.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 20515
- UPC: 076683205155
- Caliber: 9mm Luger (9×19)
- Product Type: Carbide 3-Die Set
- Series: Group B
- Dies in Set: 3
- Die Type: Sizer / Expander / Seater
- Crimp Type: Taper Crimp
- Sizing: Carbide, no case lube required
- Thread: 7/8-14 standard
- Gun Type: Pistol
What’s Included
- Carbide sizer die with decapping unit
- Expander (belling) die
- Seater die with taper crimp and bullet seater plug
- Instructions
- Warranty card
- Plastic storage case
Frequently Asked Questions
Do I need case lube with this RCBS carbide 9mm die set?
No. The carbide sizing ring is hard and slick enough that you can size 9mm brass with no lube at all. You also don't need to clean the brass before sizing, which saves a lot of time when loading in volume.
Does the RCBS 20515 set apply a taper crimp or a roll crimp?
This set uses a taper crimp, which is the correct crimp for 9mm Luger since the cartridge headspaces on the case mouth. The seater die seats the bullet and applies the taper crimp in the same step.
Will this set work in my press?
Yes. The dies use the standard 7/8-14 thread, so they fit single-stage and progressive presses from the common brands. Just thread them in and set them up like any standard die.
Is this RCBS set only for 9mm Luger, or does it cover other cases?
It's built around 9mm Luger (9×19), but as a Group B set it also handles related straight-wall cases like 9×21 and 9×23. For the vast majority of buyers, it's the go-to set for loading standard 9mm Luger ammo.





Reviews
There are no reviews yet.