Description
RCBS built the 1776 Edition to mark America's 250th anniversary, and the 9mm Luger version pairs a working set of pistol dies with commemorative flair. It's the same proven 3-die carbide setup handloaders have trusted for straight-wall cases, dressed up in a custom wooden presentation box with RCBS heritage graphics. Whether it lives on your bench or ends up on a shelf as a keepsake, this is a piece meant to be used and appreciated.
What the 1776 9mm Carbide Die Set Does
RCBS was the company that pioneered 3-die sets for straight-wall pistol brass, and this set carries that legacy. The carbide sizer die resizes the case and de-primes in one motion, and because the sizing ring is tungsten carbide, you skip the case lubrication step entirely. That alone speeds up a loading session and keeps your brass cleaner. The expander die opens the case mouth to the right diameter and adds a slight flare so bullets seat without shaving or hanging up.
Seating and Crimping With the 1776 Edition Dies
The seater die handles two jobs at once. It seats the bullet to your set depth and applies a taper crimp, which gently straightens the case mouth to remove the flare. Taper crimping is exactly what you want for 9mm since the round headspaces on the case mouth, so you keep reliable feeding in semi-autos without over-crimping. The set works with 9mm Luger along with 9×21 and 9×23 brass.
Fits Your Bench
These dies use the industry standard 7/8-14 thread that RCBS originally established, so they thread into just about any single stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon and others. Everything is machined in the USA to RCBS's usual standards. Worth noting up front: this set does not include a shell holder, so pull the correct one for 9mm if you don't already have it on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 20515-1776
- UPC: 850079710870
- Caliber: 9mm Luger (also 9×21, 9×23)
- Set Type: 3-Die Carbide Taper Crimp Set (Group B)
- Sizer Die: Tungsten carbide, no case lube required
- Crimp Style: Taper crimp
- Thread: 7/8-14 industry standard
- Country of Origin: Made in USA
- Edition: 1776 Limited Edition, America's 250th Anniversary
- Packaging: Custom wooden presentation box
- Shipping Weight: 2.385 lbs
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Bullet seater die with taper crimp
- Custom wooden presentation box
Frequently Asked Questions
Do I need case lube with the 1776 9mm carbide die set?
No. The sizer die uses a tungsten carbide ring, so you can size 9mm brass without lubricating first. That saves a step and keeps your cases and dies cleaner during a loading session.
Does this RCBS 1776 die set come with a shell holder?
It does not. Like most RCBS pistol die sets, the shell holder is sold separately, so you'll want the correct 9mm shell holder if you don't already have one. Make sure it's on hand before your first loading session.
Will these dies fit my press?
Almost certainly. The set uses the standard 7/8-14 thread that RCBS originated, which fits nearly every single stage and progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon and more. If your press takes standard dies, you're good to go.
What makes the 1776 Edition different from a regular RCBS 9mm set?
Mechanically it's the same trusted 3-die carbide set. The difference is the commemorative packaging built for America's 250th anniversary, with a custom wooden presentation box and RCBS heritage graphics. It's a limited run, so it doubles as a collectible while still being a fully usable set at the bench.



Reviews
There are no reviews yet.