Description
RCBS basically wrote the book on 3-die sets for straight-wall pistol brass, and this Group B set for .380 ACP is a straightforward way to start cranking out your own ammo. It bundles three dies into one gray plastic storage case: a carbide sizer with decapping unit, an expander die, and a seater die set up for taper crimp. Everything is machined from polished, heat-treated die steel, which is a big part of why these things hold their adjustment and last for decades of use.
What the RCBS .380 Carbide Dies Actually Do
The carbide sizer is the headliner here. The diamond-lapped tungsten-carbide inner ring is smooth enough that brass slides through without sticking or scratching, which means you can skip lubing your cases altogether and save yourself an entire messy step. That die also decaps as it sizes. From there, the expander die opens the case mouth to the right diameter and puts a slight flare on it so bullets start straight instead of shaving lead or crumpling the mouth. The seater die drops in the bullet and applies a taper crimp, which is exactly what you want on a rimless auto cartridge like the .380 that headspaces on the case mouth.
Fit, Tolerances, and Daily Use with the Group B Set
These dies are built to tolerances tighter than typical factory ammo, so finished rounds chamber cleanly round after round. Fine knurling on the die bodies gives you a solid grip for non-slip adjustment, and the expander-decapping unit locks in place so it won't drift once you've dialed it. The three-piece decapping assembly also lets you swap a bent or broken decapping pin in seconds rather than replacing the whole works.
One thing worth knowing before you load: a shell holder is sold separately, since the correct one depends on your press and cartridge. The set threads into any standard 7/8-14 single-stage or progressive press, so it drops right into most reloading setups. Backing all of it is RCBS's lifetime guarantee, which is tough to beat in this corner of the hobby.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 20415
- UPC: 076683204158
- Caliber: .380 ACP
- Product Type: Carbide 3-Die Set
- Die Series: Group B
- Dies in Set: 3
- Die Type: Sizer / Expander / Seater
- Crimp Type: Taper Crimp
- Sizer: Carbide (no case lube required)
- Thread: 7/8-14 standard
- Material: Polished, heat-treated steel
- Storage: RCBS gray plastic case
- Shipping Weight: 1.4 lbs
- Warranty: RCBS Lifetime Guarantee
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Seater die with taper crimp and bullet seater plug
- RCBS gray plastic storage case
Frequently Asked Questions
Do I need to lubricate my brass with the RCBS carbide .380 ACP die set?
No, and that's the main perk of a carbide set. The tungsten-carbide ring in the sizer die is smooth enough that cases glide through without lube, so you can skip that step and the cleanup that comes with it. It also means cases don't need to be degreased before sizing.
Does the RCBS Carbide 3-Die Set come with a shell holder?
No, the shell holder is sold separately. The right shell holder depends on your press and the cartridge, so RCBS leaves it out of the die set. Make sure you pick up the correct .380 ACP shell holder for your setup before your first loading session.
Will this set work on a progressive press?
Yes. These dies use the standard 7/8-14 thread, so they'll thread into single-stage, turret, and progressive presses from RCBS and most other brands. Just set each die according to your press and the RCBS instructions included with the set.
Does the seater die apply a taper crimp or a roll crimp?
This .380 ACP set uses a taper crimp. That's the correct choice for a rimless auto-pistol cartridge that headspaces on the case mouth, since a roll crimp could interfere with proper headspacing. The seater handles both bullet seating and the taper crimp in one operation.



Reviews
There are no reviews yet.