Description
The .45 Colt is one of those classic cartridges that reloaders love to keep feeding, and this RCBS 3-Die Roll Crimp Set gives you the full lineup of tools to do it right. Built for straight-wall pistol brass, the set covers every step of a standard reload without any gaps. You get a steel Sizer Die that resizes the case back to spec while knocking out the spent primer, an Expander Die that opens the case mouth and adds a bell for easy bullet starting, and a Seater Die that drops the bullet to depth and rolls a crimp into the case mouth.
Why the Roll Crimp Matters on This .45 Colt Die Set
That roll crimp is the headliner here. The .45 Colt sees plenty of use in single-action revolvers and lever guns, and a firm roll crimp into a cannelured bullet keeps everything seated under recoil so you don't get bullets creeping forward and tying up a cylinder. The Seater Die lets you dial in both seating depth and crimp tension, so whether you're loading cowboy action plinkers or heavier hunting rounds, you can get consistent, repeatable results.
Built Like RCBS Dies Should Be
These are the steel dies, machined to tight tolerances and finished to hold up to years of handle-pulling. One thing worth knowing up front: because the Sizer Die is steel rather than carbide, your brass needs a coat of case lube before it goes into the press. Skip that step and you'll stick a case, so a quick wipe of lube on a loading pad keeps things smooth.
This set falls into RCBS's Group B sizing and threads into any standard 7/8-14 reloading press, so it drops right into the gear you likely already own. For anyone running a .45 Colt and wanting a dependable, no-frills die set to build accurate ammo at home, this one checks all the boxes.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 19108
- UPC: 076683191083
- Caliber: .45 Long Colt (LC)
- Product Type: 3-Die Set
- Die Type: Sizer / Expander / Seater (Roll Crimp)
- Die Series: Group B
- Dies In Set: 3
- Sizer Die Material: Steel (case lube required)
- Thread Size: 7/8-14
- Country of Origin: USA
- Shipping Weight: 1.4 lbs
What’s Included
- RCBS steel Sizer Die with decapping unit
- Expander Die
- Seater Die with roll crimp and bullet seater plug
- Instruction sheet
Frequently Asked Questions
Do I need to lube my brass with this RCBS .45 Colt die set?
Yes. The Sizer Die in this set is steel rather than carbide, so your cases need a light coat of case lube before sizing. Running dry brass risks sticking a case in the die, so a quick pass on a lube pad or a spray of case lube takes care of it.
What's the difference between this roll crimp set and a carbide set?
This is the steel Group B roll crimp set, which requires case lubrication during sizing. Carbide die sets use a carbide sizing ring that lets you skip the lube step on straight-wall cases. Performance on the finished round is the same; the choice mostly comes down to whether you'd rather lube brass or pay a bit more for the convenience of carbide.
Will this set work in my reloading press?
It should. These dies use the standard 7/8-14 thread, which is the industry-standard size for single-stage and most progressive presses. Just make sure you also have the correct shell holder for the .45 Colt case, since shell holders are sold separately.
Why choose a roll crimp over a taper crimp for .45 Colt?
The .45 Colt is commonly loaded with cannelured bullets fired from revolvers and lever guns, and a roll crimp folds the case mouth into the bullet's crimp groove for a strong hold. That grip keeps bullets from walking forward under recoil, which is exactly what you want in a single-action revolver cylinder.





Reviews
There are no reviews yet.