0
0

RCBS Carbide Roll Crimp 3-Die Set .357 Mag/.38 Special 18212

UPC: 076683182128

$89.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

RCBS pioneered the 3-die carbide setup for straight-wall cases, and this Group B set covers both .357 Magnum and .38 Special out of the same box. The big draw here is the carbide sizer ring, which lets you resize and de-prime brass without a drop of case lube. That means no greasy fingers, no lube pad, and no tumbling your cases a second time to clean off the residue. For anyone loading a high volume of revolver rounds, that one feature saves a real chunk of time at the bench.

What Each Die in the RCBS Carbide Set Does

The set breaks the job into three stages. The carbide sizer die resizes the case back to spec and knocks out the spent primer with its decapping unit. The expander die opens the case mouth to the proper inside diameter and adds a light bell so cast or jacketed bullets start straight without shaving lead. The seater die then seats the bullet to your chosen depth and rolls the case mouth into the crimp groove, which is exactly what you want for revolver loads that need to resist recoil-induced bullet pull.

Fit and Build on the RCBS 18212 Dies

These dies use the industry-standard 7/8-14 thread, so they drop into just about any single-stage, turret, or progressive press from RCBS, Hornady, Lee, Lyman, Redding, or Dillon. The bodies are made from polished and heat-treated steel with fine knurling for easy, non-slip adjustment, and the expander-decapping unit locks in place so it won't slip on you mid-session. The three-piece decapping unit also makes swapping a bent decapping pin a quick fix instead of a headache.

Worth knowing before your first session: this set uses the RCBS #6 shell holder, which is sold separately and also fits cartridges like the .357 Remington Maximum. RCBS backs the dies with a limited lifetime warranty, so if something ever fails on materials or workmanship, they'll make it right.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 18212
  • UPC: 076683182128
  • Caliber: .357 Magnum / .38 Special
  • Product Type: Carbide 3-Die Set
  • Die Series: Group B
  • Dies Included: Carbide Sizer, Expander, Roll Crimp Seater
  • Crimp Type: Roll Crimp
  • Thread Size: 7/8-14
  • Shell Holder: RCBS #6 (sold separately)
  • Material: Polished, heat-treated steel with carbide sizer ring
  • Case Lube Required: No
  • Warranty: RCBS Limited Lifetime Warranty
  • Made In: USA

What’s Included

  • Carbide Sizer Die with decapping unit
  • Expander Die
  • Roll Crimp Seater Die with bullet seater plug
  • Storage box

Frequently Asked Questions

Do I need case lube with the RCBS carbide 3-die set?

No. The carbide sizer ring lets you resize and de-prime cases without any lubrication, and cases don't need to be cleaned before sizing either. That's the main advantage of carbide dies over standard steel sizing dies for straight-wall brass.

Which shell holder does this RCBS 18212 set use?

It uses the RCBS #6 shell holder, which is sold separately. That same #6 fits several cartridges including .38 Special, .357 Magnum, and .357 Remington Maximum. If you already load those on an RCBS press, there's a good chance you have one on hand.

Will these dies load both .38 Special and .357 Magnum?

Yes. This Group B set is set up for both .38 Special and .357 Magnum out of the same box, since they share the same case diameter. You'll just adjust seating depth to match the bullet and case length you're loading.

What presses will the RCBS carbide 3-die set fit?

The dies use the standard 7/8-14 thread, so they thread into nearly any single-stage, turret, or progressive press on the market. That includes presses from RCBS, Hornady, Lee, Lyman, Redding, and Dillon.

Additional information

UPC

076683182128

Manufacturer

Manufacturer Part Number

18212

Caliber/Gauge

.38 Special

Length

5.9500

Product Type

Carbide 3-Die Set

Shipping Weight

1.4625

Reviews

There are no reviews yet.

Be the first to review “RCBS Carbide Roll Crimp 3-Die Set .357 Mag/.38 Special 18212”