Description
If you're feeding a 7mm Remington Ultra Mag, factory ammo gets expensive fast and availability can be hit or miss. Rolling your own is where this RCBS Group A full-length two-die set earns its keep, giving you full control over your brass and the ability to tune loads for that long, powerful case. RCBS has been building reloading gear in the USA for decades, and these steel dies carry the reputation reloaders lean on.
The set covers the two jobs that matter most. The full-length sizer die brings your fired cases back to SAAMI minimum dimensions, working the outside of the case, de-priming, and expanding the neck to accept the next bullet in one pull of the handle. It also has vent holes built in, which keep trapped air and excess lubricant from dimpling or damaging your brass during sizing. Headspace is held to minimum tolerances so the case body length stays true through the sizing process, something that pays off with the long body of the RUM case.
What the 7mm RUM Die Set Does on the Press
The seater die handles the back half of the job, using a bullet seater plug paired with a built-in roll crimp to set your bullet to depth and lock it in place at the same time. For a hard-recoiling magnum, that bit of crimp helps keep bullets from walking under recoil in the magazine. Everything threads into a standard 7/8-14 press, so it drops right into whatever single stage or turret setup you already run.
Why Reloaders Reach for RCBS Dies
RCBS dies have a long track record of smooth operation and consistent results, and this set is cut from the company's proprietary die steel for long service life. Handloaders who run them tend to rate them highly against other brands, and they ship in the familiar green RCBS die box to keep things organized on the bench. Keep in mind a shell holder is sold separately, so grab the correct one for the RUM case head if you don't already have it.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 17801
- UPC: 076683178015
- Caliber: 7mm Remington Ultra Mag
- Product Type: Full-Length 2-Die Set
- Die Series: Group A
- Dies In Set: 2
- Die Type: Sizer / Seater
- Carbide: No
- Thread: Standard 7/8-14
- Material: Proprietary Die Steel
- Case Type: Bottleneck
- Country of Origin: United States
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
Frequently Asked Questions
Does this RCBS 7mm RUM die set include a shell holder?
No, the shell holder is sold separately with this set. You'll want to pick up the correct RCBS shell holder sized for the 7mm Remington Ultra Mag case head before you start loading. If you already load other cartridges with a matching rim diameter, you may have one on hand.
What does the full-length sizer die do?
The full-length sizer die brings your fired cases back down to SAAMI minimum dimensions, sizing the outside of the case, de-priming it, and expanding the neck to accept the next bullet. It also has vent holes to keep trapped air and excess lube from damaging your brass. Headspace is held to minimum tolerances so the case body length stays consistent.
Will these dies fit my reloading press?
Yes, the set uses the standard 7/8-14 thread, which is the industry-standard sizing for reloading dies. That means it threads right into virtually any single stage, turret, or compatible progressive press. No special adapter is needed.
Does the seater die crimp the bullet?
It does. The seater die comes with a bullet seater plug and a built-in roll crimp that locks the bullet in place as it's seated. That added crimp is helpful for a hard-recoiling magnum like the 7mm RUM, keeping bullets from shifting under recoil.



Reviews
There are no reviews yet.