0
0

RCBS 17701 Full-Length 2-Die Set .338 Remington Ultra Magnum

UPC: 076683177018

$52.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for the big .338 Remington Ultra Magnum, this is the set that handles the essentials. The RCBS 17701 is a Group A two-die set built specifically for the .338 RUM, and it covers the two steps that matter most on a bottleneck case: full-length sizing and bullet seating. RCBS machines these dies from their proprietary die steel to tight tolerances, then hand inspects them before they leave the factory, which is a big part of why their dies have earned a reputation among handloaders for being dependable work.

What the .338 RUM Die Set Actually Does

The full-length sizer die brings your fired brass back down to SAAMI minimum cartridge dimensions. In one pass it sizes the outside of the case, pushes out the spent primer with the expander-decapping unit, and expands the neck so it's ready to take a bullet. The die body is vented to let trapped air and excess lubricant escape, which helps keep your cases from getting dented during sizing. Headspace is held to minimum tolerances so the case body length stays consistent run after run.

Seating Bullets With the 17701

The seater die uses a bullet seater plug that you adjust to dial in your cartridge overall length. It also has a built-in roll crimp, so if you want to crimp a bullet in place, you can do it in the same stroke as seating. That makes it a straightforward setup for hunting loads where you want the bullet locked in tight.

Fitting It to Your Press

Both dies use the standard 7/8-14 thread, so they'll thread right into nearly any single stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others. One thing to plan for: this set does not come with a shell holder. The .338 RUM runs the RCBS #38 shell holder, which you'll want to pick up separately if you don't already have it. RCBS backs these dies with a limited lifetime warranty for the original owner.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 17701
  • UPC: 076683177018
  • Caliber: .338 Remington Ultra Magnum
  • Product Type: Full-Length 2-Die Set
  • Die Series: Group A
  • Dies Included: Full-length sizer die and bullet seater die
  • Thread: Standard 7/8-14
  • Material: Proprietary die steel
  • Shell Holder: #38 (sold separately)
  • Crimp Type: Built-in roll crimp in seater die
  • Country of Origin: Made in USA
  • Warranty: Limited lifetime warranty
  • Shipping Weight: 1.3 lbs

What’s Included

  • Full-length sizer die with expander-decapping unit
  • Seater die with bullet seater plug and built-in roll crimp
  • Green RCBS die box

Frequently Asked Questions

Does the RCBS 17701 .338 RUM die set come with a shell holder?

No, a shell holder is not included with this set. The .338 Remington Ultra Magnum uses the RCBS #38 shell holder, so you'll need to grab that separately if it's not already in your kit. The same #38 also covers cartridges like the .300 RUM, 7mm RUM, and .300 PRC, so some loaders already have one on hand.

Will these dies fit my press?

Yes. The RCBS 17701 dies use the industry standard 7/8-14 thread, which fits nearly all single stage and progressive presses, including those from RCBS, Hornady, Lee, Lyman, Redding, and Dillon. That thread standard is universal across the reloading world, so compatibility is rarely an issue.

Can I crimp my bullets with this set?

You can. The seater die has a built-in roll crimper, letting you crimp the bullet in the same stroke as you seat it. Crimping is optional, so you can seat without it if your load doesn't call for a crimp.

What exactly does the full-length sizer die do?

It brings your fired brass back to SAAMI minimum cartridge dimensions in a single pass. The die sizes the outside of the case, removes the spent primer, and expands the neck to accept a new bullet. Vents in the die body help release trapped air and excess lube to protect your cases during sizing.

Additional information

UPC

076683177018

Manufacturer

Manufacturer Part Number

17701

Caliber/Gauge

.338 Remington Ultra Magnum

Product Type

Full Length Die Set

Shipping Weight

1.3

Reviews

There are no reviews yet.

Be the first to review “RCBS 17701 Full-Length 2-Die Set .338 Remington Ultra Magnum”