Description
If you're loading .338 Lapua Magnum at home, this two-die set from RCBS covers the core of the job. It's a Group A full-length set built specifically for bottleneck rifle brass, pairing a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. Both dies use the standard 7/8-14 thread, so they drop right into just about any single-stage or turret press you already own.
What the .338 Lapua Die Set Does on the Press
The full-length sizer brings the fired case back to SAAMI minimum dimensions, working the outside of the case body while it deprimes and expands the neck to accept your next bullet. Because headspace is held to tight tolerances, the case body length stays consistent through sizing, which is a big deal for brass life and repeatable chambering across different rifles. The die is vented too, so trapped air and excess case lube won't dent or dimple your brass as it seats into the die.
Seating and Crimping with the 16601 Set
The seater die runs a bullet seater plug and a built-in roll crimper, letting you set seating depth and lock the bullet in place in the same stroke if your load calls for a crimp. For a magnum case like the .338 Lapua that sees serious recoil, that crimp option is handy for keeping bullets put under spring tension in the magazine.
Built to RCBS Standards
These dies are machined from RCBS proprietary die steel and go through a careful finishing process, which is why the brand has earned its reputation with long-range and precision crowd over decades. The set ships in the familiar green RCBS die box to keep everything organized on the bench. Note that shell holders are sold separately, so you'll want to pick up the correct one for the .338 Lapua case head if you don't already have it on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 16601
- UPC: 076683166012
- Caliber: .338 Lapua Magnum
- Product Type: Full-Length 2-Die Set
- Die Series: Group A
- Dies in Set: 2 (Sizer and Seater)
- Thread: Standard 7/8-14
- Die Material: RCBS Proprietary Die Steel
- Crimp Type: Built-in Roll Crimp
- Country of Origin: USA
- Shipping Weight: 1.3 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die storage box
Frequently Asked Questions
Does the RCBS .338 Lapua die set come with a shell holder?
No, this set includes the two dies but not a shell holder. RCBS sells shell holders separately, so you'll need to grab the correct one sized for the .338 Lapua case head. If you want a package that bundles the shell holder and a case length gauge together, RCBS offers a Supreme set in select calibers instead.
Will these dies fit my press?
Yes, both dies use the standard 7/8-14 thread, which is the industry-standard size for reloading dies. That means they thread right into common single-stage and turret presses from RCBS and other major brands. As long as your press takes standard threaded dies, you're good to go.
What exactly does the full-length sizer die do?
It resizes the entire fired case body back to SAAMI minimum dimensions so the brass chambers reliably in any .338 Lapua rifle. In the same pass it deprimes the case and expands the neck to accept your next bullet. The die is vented to keep trapped air and excess lube from denting the brass.
Can I crimp with the seater die in this set?
Yes, the seater die has a built-in roll crimper that can secure the bullet at the same time it's seated. Crimping is optional and depends on your load, but it can be useful on a hard-recoiling magnum like the .338 Lapua to keep bullets seated under magazine tension.



Reviews
There are no reviews yet.