0
0

RCBS Full Length 2-Die Set .308 Win / 7.62 NATO – 15501

UPC: 076683155016

$52.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot .308 Winchester in any real volume, a quality die set earns its keep fast, and this RCBS Group A two-die set is one of the most trusted names in the game. It covers the two jobs that matter most when loading bottleneck rifle brass: resizing fired cases back to spec and seating your bullets to a consistent depth. The set pairs a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug, so you've got everything needed to turn once-fired brass into fresh ammo.

How the RCBS .308 Die Set Does the Work

The full-length sizer die brings cases down to SAAMI minimum cartridge dimensions, sizing the outside of the case, knocking out the spent primer, and expanding the neck to accept a new bullet in one pass. It's vented to prevent case damage from trapped air and excess lubricant, which keeps your brass looking clean and your necks free of dents. Headspace is held to minimum tolerances so the case body length stays put during sizing. Because it's a full-length setup rather than neck-only, it works with every action type and happily takes range brass or mixed sources, which is why it's such a popular starting point for hunters and range shooters alike.

What to Expect From the RCBS 15501 Seater Die

The seater die has a built-in roll crimper that secures the bullet at the same time it's seated, which is handy if you're loading for a semi-auto or just want that extra bite of neck tension. Prefer to seat without crimping? Back the die off until the crimp ring clears the case mouth and you're set. Both dies use large, easy-to-adjust hex lock rings and the standard 7/8-14 thread, so they'll thread into single-stage, turret, or progressive presses without fuss.

RCBS has been building reloading gear in Oroville, California for decades, and these dies are machined from their proprietary die steel with hand-polished interiors that slide brass in and out smoothly. Note that the shell holder is sold separately; .308 Winchester brass runs the RCBS #3 shell holder.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 15501
  • UPC: 076683155016
  • Caliber: .308 Winchester / 7.62 NATO (also fits .307 Winchester)
  • Product Type: Full-Length 2-Die Set (Group A)
  • Dies Included: 2
  • Die Material: Proprietary hardened die steel
  • Carbide: No (case lube required)
  • Thread Size: 7/8-14 standard
  • Shell Holder: #3 (sold separately)
  • Country of Origin: Made in USA
  • Units per Box: 1

What’s Included

  • Full-length sizer die with expander-decapping unit
  • Seater die with bullet seater plug and built-in crimper
  • Hex lock rings
  • Plastic storage box
  • Load data / instruction sheet

Frequently Asked Questions

Does the RCBS .308 die set come with a shell holder?

No, the shell holder is sold separately. For .308 Winchester you'll want the RCBS #3 shell holder, which also covers .30-06 Springfield and a few other common cases. It's an inexpensive add-on, so grab one if you don't already have it in your kit.

Are these carbide dies, or do I need case lube?

These are steel dies, not carbide, so case lube is required when full-length sizing bottleneck rifle brass. A light spray of a quality case lube on your .308 cases is all it takes to keep sizing smooth and avoid stuck cases. This is standard for rifle dies and nothing unusual.

Will this RCBS die set work in my press?

Yes. The dies use the standard 7/8-14 thread, which fits single-stage, turret, and progressive presses from pretty much every major brand. If your press takes common dies, these will thread right in.

Can I seat bullets without crimping with the 15501 seater die?

Absolutely. The seater die has a built-in crimper, but you can disable it by backing the die off until the crimp ring no longer contacts the case mouth. That lets you seat to your preferred depth without applying a crimp, which many precision loaders prefer.

Additional information

UPC

076683155016

Manufacturer

Manufacturer Part Number

15501

Caliber/Gauge

.308 / 7.62 NATO

Length

6.1000

Product Type

Full Length Die Set

Shipping Weight

1.1813

Units per Box

1

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length 2-Die Set .308 Win / 7.62 NATO – 15501”