0
0

RCBS Full-Length 2-Die Set .30-06 Springfield – 14801

UPC: 076683148018

$52.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .30-06 Springfield has been feeding hunters and target rifles for well over a century, and if you shoot it often, loading your own is where the real payoff kicks in. This RCBS Full-Length 2-Die Set (part number 14801) gives you the two tools that handle the heart of the job: a full-length sizer die and a bullet seater die, both built for bottleneck rifle brass and both ready to work on any press that takes the standard 7/8-14 thread.

What the RCBS .30-06 Die Set Does on the Press

The full-length sizer die resizes the outside of the case, pulls the spent primer, and expands the neck in a single pull of the handle. It brings fired brass back to SAAMI minimum dimensions, which is exactly what you want when you're loading for more than one rifle or feeding a semi-auto like an M1 Garand. Headspace is held to minimum tolerances so the case body length stays put during sizing. Vent holes drilled into the die let trapped air and extra lube escape, which keeps your cases from getting dented or dimpled on the way in.

Seating and Crimping with the RCBS 2-Die Set

The seater die handles bullet depth with its adjustable seater plug, and it has a built-in roll crimper so you can crimp while you seat if your load calls for it. If you'd rather skip the crimp, just back the die off until the crimp ring clears the case mouth. It's a simple setup that works whether you're building precise bench loads or stacking up hunting rounds for the fall.

Why Reloaders Reach for RCBS Dies

RCBS has been turning out reloading gear for over 60 years, and these dies are made from case-hardened steel, properly hardened and hand polished to take the abrasive wear that comes with resizing. The large hex lock rings with hex head set screws make dialing in your adjustments quick and repeatable. Brass gets sized the same way every time, and that kind of consistency is what keeps groups tight and your reloading bench honest.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 14801
  • UPC: 076683148018
  • Caliber: .30-06 Springfield
  • Product Type: Full-Length 2-Die Set
  • Series: Group A
  • Dies Included: 2 (Full-Length Sizer, Bullet Seater)
  • Thread: Standard 7/8"-14
  • Material: Case-hardened steel
  • Shell Holder: Uses #3 (sold separately)
  • Crimp: Built-in roll crimper in seater die
  • Country of Origin: USA

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Bullet Seater Die with seater plug and built-in roll crimper
  • Decapping pin
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the RCBS .30-06 die set come with a shell holder?

No, the shell holder is not included with this set. You'll want the RCBS #3 shell holder for .30-06 Springfield, which is sold separately. That same #3 holder also works for .308 Winchester, .25-06, and several other cartridges, so it's a handy one to have on the bench.

Will these RCBS dies fit my press if it isn't an RCBS?

Yes. These dies use the industry standard 7/8-14 thread, which fits nearly every single stage and progressive press on the market, including Hornady, Lee, Lyman, Redding, and Dillon. RCBS originally set that standard, so compatibility is rarely an issue.

Can I seat bullets without crimping with this set?

Absolutely. The seater die has a built-in roll crimper, but you can skip it by backing the die off until the crimp ring no longer touches the case mouth. That lets you seat to depth without applying any crimp, which is what a lot of precision loaders prefer for bolt-gun loads.

Is a full-length sizer the right choice for .30-06?

For most people, yes. Full-length sizing brings brass back to SAAMI minimum dimensions, which is important if you load for more than one rifle or run a semi-auto like an M1 Garand where reliable chambering matters. The vent holes in the die also help keep your cases from getting dinged during the sizing stroke.

Additional information

UPC

076683148018

Manufacturer

Manufacturer Part Number

14801

Caliber/Gauge

.30-06 Springfield

Length

6

Product Type

Full Length Die Set

Shipping Weight

1.2938

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set .30-06 Springfield – 14801”