Description
If you shoot the 7mm-08 and want to control what goes down the barrel, this RCBS Group A two-die set is the backbone of a solid reloading bench. It covers the two jobs that matter most for bottleneck brass: resizing the fired case back to proper dimensions and seating your bullet to the depth you want. RCBS has been turning out reloading gear for over sixty years, and their two-die sets have earned a reputation for quality that holds up through thousands of cycles.
What the RCBS 7mm-08 Die Set Actually Does
The full-length sizer die squeezes the entire case body back down to SAAMI minimum dimensions, so your reloads chamber smoothly in any 7mm-08 rifle. Headspace is held to tight tolerances to keep the case body length from shifting during sizing. Built into that sizer is an expander-decapping unit that knocks out the spent primer and opens the case neck to accept a new bullet, all in one pull of the handle. Vent holes in the die let trapped air and extra lube escape, which keeps your brass from getting dented or stuck.
Seating and Crimping with the 7mm-08 Rem Set
The second die handles bullet seating with an adjustable seater plug, and it has a built-in roll crimper so you can lock the bullet in place at the same time you set its depth. That matters for hunting loads where recoil and magazine feeding can nudge bullets if they aren't secured. Both dies use the standard 7/8-inch-14 thread, so they drop right into any common single-stage or turret press.
Setting Up Your RCBS Group A Dies
These dies ship in a plastic storage case with instructions and a warranty card, so everything stays organized on the bench. Keep in mind the matching shell holder is sold separately, since reloaders often already have the right one on hand. For the 7mm-08 you'll want the correct RCBS shell holder to fit the .473 case head, and once you have it dialed in, this set will keep feeding your rifle consistent, quality ammo for years.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 13901
- UPC: 076683139016
- Caliber: 7mm-08 Remington
- Product Type: Full Length 2-Die Set
- Series: Group A
- Dies in Set: 2 (Sizer and Seater)
- Die Type: Full-Length Sizer with Expander-Decapping Unit / Seater with Roll Crimp
- Thread: 7/8-inch-14
- Case Type: Bottleneck Rifle
- Shell Holder: Sold Separately
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and Built-In Roll Crimp
- Plastic Storage Case
- Instructions
- Warranty Card
Frequently Asked Questions
Does the RCBS 7mm-08 die set come with a shell holder?
No, the shell holder is sold separately for this set. RCBS leaves it out because many reloaders already own the holder they need or want to pick the size that matches their setup. For the 7mm-08 Remington you'll need the shell holder that fits the .473 case head before you start sizing.
What does the full-length sizer die do in this set?
The full-length sizer resizes the entire case body back to SAAMI minimum dimensions so reloads chamber reliably in any 7mm-08 rifle. It also carries an expander-decapping unit that removes the spent primer and opens the case neck to accept a new bullet in the same stroke. Vent holes in the die let trapped air and excess lubricant escape to keep brass from getting damaged.
Will these dies fit my reloading press?
Yes. Both dies use the standard 7/8-inch-14 thread, which is the common size for single-stage, turret, and most progressive presses. If your press accepts standard threaded dies, this set will thread right in.
Does the seater die crimp the bullet?
Yes, the seater die has a built-in roll crimper that secures the bullet at the same time it sets seating depth. That's handy for hunting loads and anything that sees recoil or rough magazine feeding. You can adjust the crimp or back it off entirely depending on how your load performs.



Reviews
There are no reviews yet.