Description
The .270 Winchester has earned its place as one of the most dependable big-game cartridges out there, and if you're loading your own, you want dies that keep every round consistent. This RCBS Full Length Die Set covers the two jobs that matter most on the bench: resizing fired brass back to proper dimensions and seating bullets where you want them, round after round. It's a two-die set built for bottleneck cases, and it's cut to the same exacting standards RCBS has been known for across decades of reloading.
What the RCBS .270 Winchester Die Set Handles
The full-length sizer die does the heavy lifting. It brings fired cases back to SAAMI minimum dimensions, sizes the outside of the case body, de-primes the spent primer, and expands the neck so it's ready to accept a new bullet. The die is vented to clear trapped air and excess lube, which keeps your brass from getting dinged during the sizing stroke. Headspace is held to minimum tolerances so the case body length stays put through full-length sizing, which is exactly what you want for reliable chambering in a hunting rifle.
Seating and Crimping with the .270 Win Two-Die Set
The seater die comes with a bullet seater plug and a built-in roll crimper, so you can seat the bullet and crimp it in the same stroke if your load calls for it. That's handy for hunting ammo where you want the bullet locked in place under recoil. The dies thread in with the standard 7/8-14 setup, so they'll drop right into pretty much any single-stage or turret press you've already got.
Built to Last on the Bench
RCBS machines these from hardened steel and finishes the internals to a smooth polish, which is part of why reloaders keep coming back to them. The large hex lock rings make dialing in your adjustments straightforward and let you lock settings down so they don't drift. It's the kind of gear that earns a permanent spot on the reloading bench and keeps turning out accurate .270 loads for years.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 13501
- UPC: 076683135018
- Caliber: .270 Winchester
- Product Type: Full Length 2-Die Set (Group A)
- Thread: Standard 7/8-14
- Material: Hardened steel
- Case Type: Bottleneck rifle
- Included Dies: Full-Length Sizer Die, Bullet Seater Die
- Sizer Die: Expander-Decapping Unit
- Seater Die: Bullet seater plug with built-in roll crimper
- Country of Origin: United States
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Plastic storage case
Frequently Asked Questions
Do I need a shell holder with the RCBS .270 Winchester die set?
Yes, a shell holder is not included with this set and is sold separately. The .270 Winchester shares a case head size with cartridges like the .30-06 and .25-06, so if you already load those, your shell holder will likely work here too. Check your press and holder chart to confirm the correct size before you get started.
Will these dies fit my press?
They use the standard 7/8-14 thread, which is the industry-standard sizing for reloading dies. That means they'll thread right into just about any single-stage, turret, or progressive press on the market. No adapters or special fittings needed.
Can the seater die crimp while it seats the bullet?
Yes. The seater die has a built-in roll crimper, so you can seat and crimp in the same stroke if your load calls for it. That's a nice feature for hunting ammo where you want the bullet held firmly under recoil, though you can also back the crimp off and seat without crimping if you prefer.
Is this a full-length sizing set or neck sizing?
This is a full-length die set, meaning the sizer works the entire case body back down to SAAMI minimum dimensions rather than just the neck. Full-length sizing is the go-to choice for brass that cycles through different rifles or for hunting loads where reliable chambering matters most. It also de-primes and expands the neck in the same stroke.



Reviews
There are no reviews yet.