Description
RCBS has been turning out reloading gear for decades, and this two-die set for 6.8mm Remington SPC carries that same reputation for steady, dependable performance. It's built for bottleneck rifle cases and gives you the two tools you need to run 6.8 SPC brass through a full reloading cycle: a full-length sizer die with an expander-decapping unit, and a seater die with a bullet seater plug. Whether you're loading a couple boxes for the weekend or feeding a steady habit at the range, these dies make easy work of it.
What the 6.8 SPC Full-Length Set Actually Does
The full-length sizer die brings your fired cases back to SAAMI minimum dimensions, so they chamber clean round after round. In a single pass it sizes the outside of the case, knocks out the spent primer, and expands the neck to grab the next bullet. The die body is vented to let trapped air and excess lube escape, which keeps your brass from getting dinged or dented during sizing. Headspace stays held to tight tolerances too, so you're not stretching or changing the case body length as you work.
Seating and Crimping with the RCBS 13301 Dies
The seater die comes with a bullet seater plug and a built-in roll crimper, so you can seat the bullet and crimp it in the same motion. That's handy for 6.8 SPC loads running through a semi-auto, where a solid crimp helps keep bullets from backing out under recoil. Both dies use the standard 7/8"-14 thread, so they'll thread right into just about any single-stage or turret press you've already got on the bench.
A Few Things Worth Knowing
These are steel dies, not carbide, so you'll want to lube your cases before sizing like you would with most bottleneck rifle dies. The set ships in the familiar RCBS green die box to keep everything organized and protected between sessions. One thing to plan for: the shellholder is sold separately, so grab the correct one for 6.8 SPC if you don't already have it on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 13301
- UPC: 076683133014
- Caliber: 6.8mm Remington SPC
- Product Type: Full-Length Die Set
- Dies in Set: 2
- Die Material: Steel (non-carbide)
- Thread Size: 7/8"-14
- Case Type: Bottleneck rifle
- Crimp Type: Built-in roll crimp
- Sizing: Full-length, SAAMI minimum dimensions
- Made In: USA
- Shipping Weight: 1.15 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- RCBS green die storage box
Frequently Asked Questions
Do I need to lube my cases with this RCBS 6.8 SPC die set?
Yes. These are steel dies rather than carbide, so case lube is recommended before full-length sizing. A thin, even coat of lube helps the brass slide through smoothly and keeps you from sticking a case in the sizer.
Does the set come with a shellholder?
No, the shellholder is sold separately. You'll need the correct shellholder for 6.8mm Remington SPC to run the cases on your press, so pick one up if it isn't already in your kit.
Will these dies fit my press?
They use the industry-standard 7/8"-14 thread, so they'll thread into virtually any single-stage or turret press. If your press takes common dies, this set will drop right in.
Does the seater die crimp the bullet?
It does. The seater die has a built-in roll crimper that secures the bullet at the same time it seats it. That's a nice feature for 6.8 SPC loads headed into a semi-auto, where a good crimp helps prevent bullet setback.




Reviews
There are no reviews yet.