Description
If you're loading .260 Remington and want brass that chambers clean every time, this RCBS Group A two-die set covers the two jobs that matter most: sizing your fired cases back to spec and seating your bullets straight. It's machined from RCBS proprietary die steel, uses the standard 7/8-14 thread that fits just about any common single-stage or turret press, and ships in the familiar green die box.
What the RCBS .260 Remington Die Set Actually Does
The full-length sizer handles the heavy lifting. It squeezes the outside of the case back down to SAAMI minimum dimensions, pushes out the spent primer, and runs an expander ball through the neck so it's ready to accept a new bullet. The die is vented to let trapped air and excess lube escape, which keeps you from denting shoulders or getting stuck cases. Headspace is held to minimum tolerances so the body length of the case stays consistent through sizing, and that consistency is what keeps your groups tight.
Seating and Crimping with the RCBS 12801 Set
The second die is your bullet seater. It uses an adjustable seater plug so you can dial in your seating depth, and it has a built-in roll crimper that lets you crimp and seat in the same stroke if your load calls for it. For heavier recoiling hunting loads or anything feeding through a magazine, that crimp helps lock bullets in place so they don't move under recoil.
Who Reaches for the RCBS Full-Length Die Set
This is a bread-and-butter full-length setup for .260 Rem, which is a favorite among precision and long-range hunting folks for its flat-shooting 6.5mm bullets. Whether you're new to the cartridge or you've been loading it for years, this set gives you the two tools you need to turn fired brass into accurate, reliable rounds without overcomplicating the bench. It works with standard RCBS shell holders, which are sold separately.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 12801
- UPC: 076683128010
- Caliber: .260 Remington
- Product Type: Full-Length Die Set
- Series: Group A
- Dies in Set: 2
- Thread Size: 7/8-14
- Die Material: Proprietary die steel
- Gun Type: Rifle
- Length: 5.95 in
- Shipping Weight: 1.2 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Bullet Seater Die with seater plug and built-in roll crimper
- RCBS green die storage box
Frequently Asked Questions
Does the RCBS .260 Remington die set come with a shell holder?
No, shell holders are not included with this set. You'll need the correct RCBS shell holder for .260 Remington, which shares the same case head as cartridges like the .308 and 7mm-08. They're sold separately and inexpensive, so it's worth grabbing one if you don't already have it.
Will these dies fit my press?
Yes. The RCBS 12801 set uses the standard 7/8-14 thread, so it fits virtually all common single-stage, turret, and progressive presses from RCBS and other major brands. If your press takes standard threaded dies, you're good to go.
Can the seater die crimp while it seats the bullet?
It can. The seater die has a built-in roll crimper that lets you seat and crimp in a single stroke when your load calls for it. If you prefer to seat without crimping, you can back the die off so it only sets depth, which is common for precision loads.
What's the difference between a full-length die set and a neck-sizing set?
A full-length sizer resizes the entire case body and shoulder back to SAAMI minimum dimensions, which is the best choice for brass fired from multiple rifles or for loads that need to chamber reliably. Neck-sizing only works the neck and is sometimes used for brass dedicated to one rifle. This RCBS set is a full-length setup, making it the more versatile pick for most .260 Rem reloaders.




Reviews
There are no reviews yet.