Description
The .257 Weatherby Magnum is a fast, flat-shooting round that rewards careful reloading, and this RCBS two-die set gives you the tools to do it right. Made in the USA from case-hardened steel, the set covers full-length sizing and bullet seating in one tidy package so your fired brass gets back to proper dimensions and chambers smoothly in your rifle.
What the .257 Weatherby Magnum Die Set Handles
The full-length sizer brings cases back to SAAMI minimum dimensions, sizing the outside of the case, knocking out the spent primer, and expanding the neck to accept your next bullet. It also has vent holes built in, which let trapped air and excess lube escape so you avoid dented or crushed brass during the sizing stroke. Headspace is held to tight tolerances to keep the case body length consistent, which matters a lot with a high-velocity magnum like this one.
Seating and Crimping with the RCBS 12601 Set
The seater die uses a bullet seater plug and includes a built-in roll crimper, so you can set bullet depth and crimp in the same motion if your load calls for it. Both dies use the standard 7/8-14 thread, which means they drop right into any common single-stage or turret press without fuss. The dies ship in the familiar green RCBS storage box with instructions and a loading data table, keeping everything organized on the bench.
Why Reloaders Reach for RCBS Dies
RCBS has been building reloading gear for decades, and their die sets have a solid reputation for consistency and longevity. Every die is hand inspected before it leaves the factory, and they're backed by the RCBS warranty. One thing to plan for: this set does not include a shell holder, and the .257 Weatherby Magnum uses RCBS Shell Holder #4, which you'll want to grab separately if you don't already have it.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 12601
- UPC: 076683126016
- Caliber: .257 Weatherby Magnum
- Product Type: Full Length 2-Die Set
- Number of Dies: 2
- Die Group: Group A
- Thread: 7/8-14 Standard
- Material: Case-Hardened Steel
- Carbide: No
- Shell Holder: Uses #4 (sold separately)
- Crimp Type: Built-in roll crimper
- Case Type: Bottleneck
- Country of Origin: USA
What’s Included
- Full-Length Sizer Die with expander-decapping unit
- Bullet Seater Die with seater plug and built-in roll crimper
- Plastic storage case (green RCBS die box)
- Instructions
- Loading data table
- Warranty card
Frequently Asked Questions
Does the .257 Weatherby Magnum die set come with a shell holder?
No, a shell holder is not included with this set. The .257 Weatherby Magnum uses RCBS Shell Holder #4, which you'll need to purchase separately if you don't already have one. It's an easy, inexpensive add-on that gets overlooked, so grab it when you order.
Will these RCBS dies fit my press?
Yes, both dies use the industry-standard 7/8-14 thread, so they'll thread into virtually any standard single-stage, turret, or progressive press. There's no special adapter or bushing needed to get up and running.
What dies are in the 12601 set?
You get two dies: a full-length sizer die with an expander-decapping unit, and a seater die with a bullet seater plug and built-in roll crimper. The sizer resizes the case, removes the spent primer, and expands the neck, while the seater sets bullet depth and can crimp in the same stroke.
Are these carbide dies?
No, this is a case-hardened steel die set rather than carbide. As with most bottleneck rifle dies, you'll want to apply case lube before running brass through the full-length sizer to keep sizing smooth and avoid stuck cases.




Reviews
There are no reviews yet.