Description
The RCBS Full-Length 2-Die Set for .250 Savage is a workhorse pairing built for anyone keeping the old 250-3000 fed with fresh handloads. This is the Group A set, machined from hardened steel to the kind of tolerances that make your rounds chamber smoothly round after round. If you shoot a classic Savage 99 or a bolt gun in this caliber, these dies are the backbone of a clean loading bench.
What the .250 Savage Die Set Handles on the Bench
The full-length sizer die does the heavy lifting. It squeezes the outside of the fired case back down to SAAMI minimum dimensions, deprimes the spent primer, and expands the neck so it grips the next bullet correctly. Headspace is held to tight tolerances so you aren't stretching the case body during sizing, which means longer brass life and more trouble-free chambering. The die body is vented too, so trapped air and extra case lube have somewhere to go instead of denting or buckling your shoulders.
Seating and Crimping Your .250 Savage Rounds
The seater die uses a bullet seater plug to set depth and includes a built-in roll crimper, so you can seat and crimp in the same stroke if your load calls for it. Dial the seater stem in and you'll get consistent cartridge overall length from one round to the next. Both dies carry the standard 7/8-14 thread, so they'll thread right into any common single stage, turret, or progressive press without adapters.
Setting Up the RCBS .250 Savage Die Set
One thing worth knowing up front: this set does not come with a shell holder. For .250 Savage you'll want the RCBS #3 shell holder, which is the correct match for this case head. Pick one up along with your brass, powder, primers, and projectiles and you're ready to start turning out rounds for a cartridge that still earns its keep in the deer woods and at the range.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 12201
- UPC: 076683122018
- Caliber: .250 Savage (250-3000 Savage)
- Die Group: Group A
- Product Type: Full-Length 2-Die Set
- Dies in Set: 2 (Sizer / Seater)
- Thread: 7/8-14
- Material: Hardened Steel
- Carbide: No
- Recommended Shell Holder: RCBS #3
- Made In: USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
Frequently Asked Questions
Does the RCBS .250 Savage die set include a shell holder?
No, a shell holder is not included with this set. For .250 Savage you'll need the RCBS #3 shell holder, which matches the case head correctly. It's a small, inexpensive add-on, so grab one when you order your dies.
Will this die set fit my reloading press?
Yes. Both dies use the standard 7/8-14 thread, so they'll thread directly into any common single stage, turret, or progressive press. No adapters or special tooling required.
What does the full-length sizer die actually do?
It resizes the entire outside of the fired case back to SAAMI minimum dimensions, deprimes the old primer, and expands the case neck to accept a new bullet. Headspace is held to minimum tolerances so the case body length stays consistent, and vents in the die let trapped air and excess lube escape to protect your brass.
Can the seater die crimp as well as seat?
Yes. The seater die has a built-in roll crimper that can crimp the bullet in place during the same stroke as seating. You can dial it in for a crimp or back it off if your load doesn't call for one.




Reviews
There are no reviews yet.