Description
This is RCBS at its most special. The 11101-1776 is part of the RCBS 1776 Edition lineup, a limited run put together to mark America's 250th anniversary. It's a Group A full-length two-die set chambered for .223 Remington, and what sets it apart from the standard green-box version is the custom wooden presentation box stamped with RCBS heritage graphics. The dies themselves carry the same reputation RCBS has earned since 1943, so this is a set you can proudly display or put straight to work loading rounds.
Inside you get two dies. The full-length sizing die resizes the whole case back down to SAAMI minimum dimensions, deprimes the spent primer, and expands the neck to grab the next bullet, all in one pass. Vents in the body let trapped air and excess lube escape so your cases come out clean and undamaged. The seater die handles bullet seating depth and includes a built-in crimp taper if you want to crimp. Both dies use the standard 7/8-14 thread, so they drop right into any common single-stage or progressive press.
What Makes the RCBS 1776 .223 Die Set Different
Most reloaders already trust the regular 11101 set for .223. This 1776 Edition takes that same proven Group A tooling and dresses it up for the occasion with the commemorative wooden box. It's machined in the USA at the RCBS factory in Oroville, California, and each die is hand inspected before it ships. The decapping pins are replaceable, which is a nice touch when you're running high volume and happen to break one.
Loading .223 with the RCBS 1776 Edition Set
The .223 Remington is one of the most popular cartridges to reload, and a quality full-length sizer is the backbone of consistent brass, especially for ammo that cycles through semi-autos. This set keeps headspace tight and brings fired brass back to spec every time. Pair it with a shell holder and your powder measure of choice and you're ready to run. RCBS backs these dies with its lifetime warranty, so it's built to outlast the celebration it was made for.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 11101-1776
- UPC: 850079710832
- Caliber: .223 Remington
- Die Type: Full-Length 2-Die Set (Group A)
- Edition: RCBS 1776 Limited Edition
- Thread: 7/8-14 Standard
- Material: Proprietary Die Steel
- Dies Included: Full-Length Sizer, Seater
- Country of Origin: Made in USA
- Packaging: Custom Wooden Presentation Box
- Warranty: RCBS Limited Lifetime
What’s Included
- Full-length sizing die with expander-decapping unit
- Seater die with bullet seater plug
- Custom wooden presentation box with RCBS heritage graphics
Frequently Asked Questions
What makes the RCBS 1776 Edition .223 die set different from the standard 11101?
The tooling is the same proven Group A full-length two-die set RCBS makes for .223 Remington. The difference is the 1776 Edition packaging, a custom wooden presentation box with RCBS heritage graphics made to commemorate America's 250th anniversary. It's a limited run, so once they're gone they're gone.
What dies come in this set?
You get two dies: a full-length sizing die and a seater die. The sizer resizes the case to SAAMI minimum dimensions, deprimes, and expands the neck in one stroke, while the seater sets your bullet depth and includes a built-in crimp taper if you want to crimp. Together they cover the core steps of loading .223 Remington brass.
Will the RCBS 1776 .223 dies fit my press?
Yes. These dies use the standard 7/8-14 thread, which is the industry norm for single-stage and progressive reloading presses. You'll just need the correct shell holder for .223 Remington, which is not included.
Are these dies covered by warranty?
They are. RCBS backs its reloading dies with a limited lifetime warranty against defects in material and workmanship for as long as the original owner keeps them. Each die is machined in the USA and hand inspected before it leaves the factory.





Reviews
There are no reviews yet.