Description
The .222 Remington has earned a legendary reputation for accuracy, and a quality die set is the foundation for getting the most out of it. This RCBS Full-Length 2-Die Set covers the two jobs every reloader needs for bottleneck brass: a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. It's part of RCBS's Group A lineup for popular rifle cartridges and uses the standard 7/8-14 threading, so it drops right into just about any single-stage or turret press you've already got.
What the RCBS .222 Remington Die Set Does on the Press
The full-length sizer works the entire outside of the case back down to SAAMI minimum dimensions, deprimes the spent primer, and expands the case neck to accept a new bullet in one pull of the handle. Headspace is held to tight tolerances so you're not stretching case body length during sizing, which helps with case life and consistent chambering. The die body carries vent holes that let trapped air and extra lube escape, so you avoid dented shoulders when you're running cases hard.
Seating and Crimping with the .222 Rem 2-Die Set
The seater die includes a bullet seater plug and a built-in roll crimper, giving you the option to crimp as you seat or skip the crimp entirely for precision loads. For a cartridge like the triple deuce, where benchrest crowds chase itty-bitty groups, that flexibility matters. Many .222 shooters seat without crimping and tune their bullet depth relative to the lands, and this die lets you do exactly that.
Built the Way RCBS Dies Have Always Been Made
RCBS has been turning out reloading gear for decades, and these dies carry the hallmarks the name is known for: hardened die bodies, hand-polished internals, and fine body knurling for grippy, no-slip adjustment. The three-piece expander-decapping assembly locks down to eliminate slippage and lets you swap a broken decapping pin quickly instead of fighting the whole unit. Keep in mind this set needs an RCBS #10 shell holder, which is sold separately.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 10901
- UPC: 076683109019
- Caliber: .222 Remington
- Product Type: Full-Length 2-Die Set
- Series: Group A
- Dies In Set: 2 (Full-Length Sizer, Bullet Seater)
- Thread Size: 7/8-14
- Material: Case-Hardened Steel
- Crimp Type: Built-in Roll Crimper
- Required Shell Holder: RCBS #10 (sold separately)
- Shipping Weight: 1.125 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Bullet Seater Die with Seater Plug and Built-in Roll Crimper
- Plastic Storage Case
Frequently Asked Questions
Does the RCBS .222 Remington die set come with a shell holder?
No, the shell holder is not included with this set. You'll want an RCBS #10 shell holder to run .222 Remington brass, and it's sold separately. It's a cheap, common part that most reloading retailers carry.
Will this die set fit my reloading press?
Yes, in nearly all cases. These dies use the industry-standard 7/8-14 thread, so they thread into any standard single-stage, turret, or progressive press. If your press takes common dies, this set will fit.
Can I seat bullets without crimping them with this set?
Absolutely. The seater die has a built-in roll crimper, but you can back it off and seat bullets with no crimp at all. A lot of .222 handloaders skip the crimp for precision and tune seating depth instead, and this die gives you that option.
Is a full-length sizer the right choice for the .222 Remington?
Full-length sizing brings the case body and neck back down to spec so rounds chamber smoothly in any rifle, which makes it a solid all-around pick. The .222 has a long neck that aids bullet alignment and a well-earned accuracy reputation, and this set deprimes, sizes, and expands in one stroke. If you later chase ultimate precision in a single rifle, you can explore neck sizing, but this set handles the everyday reloading work.





Reviews
There are no reviews yet.