Description
RCBS built the MatchMaster line for folks who take their handloading seriously, and this neck sizing set for .22-250 Remington fits right into a precision workflow. You get two dies in the box: a bushing neck sizing die and a micrometer-adjustable seating die. The whole point of the setup is control. Instead of relying on a fixed expander ball to set neck tension, the sizing die uses an interchangeable neck bushing so you decide exactly how much tension goes on the bullet. That approach works the brass less than conventional sizing, which helps extend case life and keep your necks consistent from firing to firing.
What Sets the MatchMaster Neck Sizing Die Apart
The sizing die uses RCBS's precision-machined neck bushings to set neck tension without reworking the body dimensions of your fired cases. There's a titanium carbo nitride coated expander in the design that gives you smooth case extraction and keeps brass buildup on the expander down, which in turn reduces how much the neck gets stretched. Each die body is made from case-hardened steel with internal surfaces that are precision-drilled, reamed, and hand-polished. It runs the standard 7/8-14 thread, so it drops right into any common single-stage press.
Dialing In the Seating Die for .22-250 Rem
The MatchMaster seating die is the real conversation starter in this set. It features an oversize micrometer up top for quick, repeatable seating depth changes, plus a free-floating, self-centering seating stem that keeps bullets aligned as they go in. There's also a bullet loading window with a retention system, so you drop the bullet into the window and simply run the press to seat it. It's a smooth, fuss-free way to load, and the deep blued finish gives it a look worthy of a fine firearm.
One thing worth knowing up front: the neck bushings are sold separately, which is standard for bushing-style dies. That lets you buy the exact bushing diameters that match your brass and your preferred neck tension. RCBS suggests keeping a couple of bushings one to two sizes above and below your target diameter so you've got room to fine-tune.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 10610
- UPC: 604544654028
- Model: MatchMaster
- Caliber: .22-250 Remington
- Die Type: Neck Sizer
- Series: Neck Sizing Bushing Die Set
- Dies In Set: 2
- Thread: 7/8-14
- Material: Case-Hardened Steel
- Expander: Titanium Carbo Nitride Coated
- Seating Adjustment: Oversize Micrometer
- Country of Origin: United States
- Warranty: Limited Lifetime
What’s Included
- Neck Sizing Bushing Die
- MatchMaster Micrometer Bullet Seating Die
- Instruction manual
Frequently Asked Questions
Do the neck bushings come with this MatchMaster die set?
No. The neck bushings are sold separately, which is standard for bushing-style sizing dies. This lets you choose the exact bushing diameter that matches your brass and the neck tension you want. RCBS recommends keeping bushings one to two sizes above and below your target so you have room to fine-tune.
How do I pick the right bushing size for my .22-250 loads?
One common method is to measure the outside neck diameter of a loaded cartridge and subtract roughly .002 to .003 inch, which leaves about .001 inch of spring-back for proper neck tension. You can also measure the neck wall thickness, multiply by two, add the bullet diameter, and subtract about .001 inch. To get the full benefit, this setup works best with quality brass that has consistent neck thickness.
What dies are in the MatchMaster neck sizing set for .22-250 Remington?
You get two dies: a neck sizing bushing die and the MatchMaster micrometer bullet seating die. The sizing die handles neck tension through interchangeable bushings while leaving the case body dimensions alone. The seater uses an oversize micrometer and a free-floating stem along with a bullet loading window for smooth, consistent seating.
Will this die set fit a standard reloading press?
Yes. Both dies use the standard 7/8-14 thread, so they'll thread into any common single-stage press. Keep in mind you'll need the correct shell holder for .22-250 Remington, which is not included with this die set.





Reviews
There are no reviews yet.