0
0

RCBS MatchMaster Full-Length Bushing Die Set .22-250 Remington

UPC: 604544653694

$173.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS MatchMaster Full-Length Bushing Die Set for .22-250 Remington is built for handloaders who care about repeatable neck tension and tight, concentric ammo. It brings together the best ideas from the RCBS Gold Medal and Competition die families into a two-die set that gives you real control over how your brass is sized and how your bullets seat. If you're working up loads for a varmint rig or a long-range .22-250, this is the kind of tooling that rewards the extra attention.

What the MatchMaster Sizing Die Brings to the Bench

The full-length sizing die uses an interchangeable neck bushing system, so you choose the exact bushing diameter that gives you the neck tension you want. A good starting point is to measure the outside neck diameter of a loaded round and subtract .002 to .003 inch to allow for brass springback. Keep in mind the neck bushing is sold separately, which is standard for match-tier bushing dies and lets you tune for your specific brass. The expander is coated in titanium carbo-nitride to cut down on friction and brass buildup, so case extraction stays smooth and the neck sees less stretch. RCBS also tucks a separate decapping pin holder in the box, so you can run the die without the expander ball if you prefer that approach.

Why the MatchMaster Seater Die Stands Out

The seating die is where this set earns its keep. It features a bullet loading window so you drop the bullet in through the side instead of balancing it on the case mouth, which saves your fingertips and helps keep everything aligned. A free-floating, self-centering seating stem lines up the case and bullet before they ever meet, and the oversized micrometer top makes dialing in your overall length quick and easy to read in .001 inch clicks. For load development where you're testing different seating depths, that micrometer is genuinely handy.

The dies use standard 7/8-14 threads, so they'll thread right into any common single-stage or turret press. For anyone stepping up from basic die sets into precision reloading, this is a solid, well-finished setup that pairs nicely with quality brass and the bushings of your choice.

Key Specifications

  • Manufacturer: RCBS
  • Series: MatchMaster
  • Manufacturer Part Number: 10608
  • UPC: 604544653694
  • Caliber: .22-250 Remington
  • Die Type: Full-Length Bushing
  • Dies in Set: 2
  • Included Dies: Full-Length Bushing Sizing Die, Micrometer Bullet Seating Die
  • Thread: 7/8-14
  • Expander Coating: Titanium Carbo-Nitride
  • Seater Adjustment: Oversized Micrometer, .001" increments
  • Neck Bushing: Sold Separately
  • Shipping Weight: 1.25 lbs

What’s Included

  • Full-length bushing sizing die
  • Micrometer-adjustable bullet seating die
  • Titanium carbo-nitride coated expander/decapping assembly (pre-installed)
  • Separate decapping pin holder
  • Storage case
  • Instruction booklet and reloading data card

Frequently Asked Questions

Does the MatchMaster .22-250 die set come with a neck bushing?

No, the neck bushing is sold separately, which is normal for match-grade bushing dies. This lets you pick the exact bushing diameter for the neck tension and brass you're running. To size one, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch for brass springback.

What makes the MatchMaster seating die different from a standard seater?

The seater has a side loading window so you drop the bullet in rather than balancing it on the case mouth, which saves your fingers and aids alignment. It also uses a free-floating, self-centering stem that lines up the case and bullet before contact. The oversized micrometer top lets you dial seating depth in clear .001 inch increments, which is great for load development.

Will these dies fit my press?

Yes, the MatchMaster dies use standard 7/8-14 threads, so they thread into any common single-stage or turret reloading press. You will still need the correct shell holder for the .22-250 Remington case head, which is not included in this set.

Can I run the sizing die without the expander ball?

You can. The expander comes pre-installed with its titanium carbo-nitride coating, but RCBS includes a separate decapping pin holder in the box so you can run the die without the expander if you'd rather control neck sizing purely with the bushing. That option is handy for brass with inconsistent neck-wall thickness or for neck-turned cases.

Additional information

UPC

604544653694

Manufacturer

Manufacturer Part Number

10608

Caliber/Gauge

.22-250 Remington

Shipping Weight

1.25

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster Full-Length Bushing Die Set .22-250 Remington”