Description
The .22-250 Remington hits hard on prairie dogs and coyotes, and it's one of those cartridges that really rewards a careful handloader. This RCBS Full-Length 2-Die Set gives you the two tools you need to do it right: a full-length sizer die and a bullet seater die, both machined to the same tight standards RCBS has been known for across decades of reloading benches.
The sizer die does a lot of work in one stroke. It resizes the outside of the case back to SAAMI minimum dimensions, pushes out the spent primer with the expander-decapping unit, and opens up the neck so it's ready to take a new bullet. Vent holes in the die let trapped air and excess lube escape, which keeps your cases from getting dented or stuck during sizing. Full-length sizing is the way to go if you're feeding more than one rifle or want brass that chambers smoothly every time without fuss.
What the RCBS 10601 Die Set Brings to the Bench
These dies are cut from case-hardened steel, then hand-polished inside so the working surfaces are smooth and consistent. The seater die includes a bullet seater plug and a built-in roll crimp, so you can seat and crimp in one pass. If you'd rather seat without crimping, back the die off until the crimp ring clears the case mouth and you're set. Both dies use the standard 7/8"-14 thread, so they'll thread right into any common single-stage or turret press.
Setting Up the .22-250 2-Die Set
One thing worth knowing up front: this set does not come with a shell holder. The .22-250 uses the RCBS #3 shell holder, which you'll want to grab separately if you don't already have one on hand. Beyond that, the dies are straightforward to dial in and are backed by the RCBS reputation for longevity. Case-hardening and hand polishing mean these dies shrug off the abrasive wear that comes with resizing, so they'll keep producing clean brass for years of loading sessions.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 10601
- UPC: 076683106018
- Caliber: .22-250 Remington
- Product Type: Full-Length 2-Die Set
- Die Series: Group A
- Number of Dies: 2
- Die Type: Full-Length Sizer and Bullet Seater
- Crimp Style: Roll Crimp (built in)
- Thread Size: 7/8"-14
- Material: Case-Hardened Steel, Hand Polished
- Shell Holder: #3 (sold separately)
- Case Type: Bottleneck Rifle
- Country of Origin: USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Bullet Seater Die with Bullet Seater Plug and built-in roll crimper
- Storage box
Frequently Asked Questions
Does the RCBS .22-250 die set come with a shell holder?
No, a shell holder is not included with this set. The .22-250 Remington uses the RCBS #3 shell holder, which you'll need to purchase separately if you don't already have one. It's a common holder shared across several cartridges, so plenty of reloaders already have one in the drawer.
Will these RCBS dies fit my press?
Yes, they use the standard 7/8"-14 thread, which is the universal size for the vast majority of single-stage and turret reloading presses. If your press takes standard dies, these will thread right in with no adapters needed.
Can I seat bullets without crimping using the RCBS 10601 seater die?
You can. The seater die has a built-in roll crimp, but if you want to seat without crimping, just back the die off until the crimp ring no longer contacts the case mouth. That lets you set your seating depth and skip the crimp entirely when you prefer.
What does the full-length sizer die do in this set?
The sizer resizes the whole case body back to SAAMI minimum dimensions, removes the spent primer with the decapping unit, and expands the neck to accept a new bullet. Vent holes let trapped air and excess lube escape so your brass doesn't get dented. Full-length sizing is a good choice when you load for more than one rifle or want brass that chambers reliably every time.





Reviews
There are no reviews yet.