Description
The RCBS 10201 is a Group A full-length two-die set cut specifically for the .22 Hornet, that little varmint cartridge that rewards careful handloading. If you shoot a Hornet, you already know it burns a small charge and likes consistent brass, and that is exactly where a quality die set earns its keep. This set gives you the two dies that cover the core of the job: a full-length sizing die and a bullet seating die.
What the RCBS 10201 Dies Handle
The full-length sizer brings your fired brass back down to SAAMI minimum dimensions so cases chamber smoothly round after round. It sizes the outside of the case, knocks out the spent primer, and expands the neck in one stroke thanks to the built-in expander-decapping unit. Vent holes in the die let trapped air and extra case lube escape, which keeps you from dimpling shoulders during sizing. Headspace is held to tight tolerances so you are not stretching case bodies every time you run the lever.
Seating and Crimping with the 10201 Set
The seater die comes with a bullet seater plug and a built-in roll crimp, so you can set your bullet and crimp it in the same motion if your load calls for it. That is handy on the Hornet, where a bit of crimp can help with consistent ignition on those small powder charges.
Fit and Build on the RCBS 10201
These dies are machined from RCBS proprietary die steel at the company's Oroville, California factory and use the industry-standard 7/8-14 thread, so they thread right into RCBS, Hornady, Lee, Lyman, Redding, and Dillon presses. The set ships in the familiar green RCBS box to keep everything organized on the bench. You will want shell holder #12 to run this set, and it is sold separately, so grab one if you do not have it already.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 10201
- UPC: 076683102010
- Caliber: .22 Hornet
- Series: Group A
- Product Type: Full-Length 2-Die Set
- Dies in Set: 2
- Die Type: Sizer / Seater
- Thread: 7/8-14 standard
- Material: Proprietary die steel, case hardened
- Shell Holder: Uses #12 (sold separately)
- Carbide: No
- Country of Origin: Made in USA
- Shipping Weight: 1.1 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Bullet Seater Die with seater plug and built-in roll crimp
- Green RCBS plastic storage box
Frequently Asked Questions
Does the RCBS 10201 die set come with a shell holder?
No, the shell holder is not included with this set. You will need RCBS shell holder #12 to load .22 Hornet with these dies, and it is sold separately. If you are new to the Hornet, pick one up at the same time so you are ready to go.
Will the RCBS 10201 dies fit my press?
Yes, these dies use the industry-standard 7/8-14 thread, which fits nearly all single-stage and progressive presses. That includes RCBS, Hornady, Lee, Lyman, Redding, and Dillon. RCBS originally set that standard, so compatibility is rarely an issue.
What does the full-length sizer die on the 10201 do?
It resizes your fired .22 Hornet brass back to SAAMI minimum dimensions so cases chamber reliably. In the same stroke it removes the spent primer and expands the case neck to accept a new bullet. Vent holes let trapped air and excess lube escape to help keep your shoulders from getting dented.
Can the RCBS 10201 seater die crimp the bullet?
Yes, the seater die has a built-in roll crimp along with the bullet seater plug. That lets you seat and crimp in a single operation if your load calls for it. On the Hornet, a light crimp can help with more consistent ignition on small powder charges.



Reviews
There are no reviews yet.