Description
Pulling a bullet on a cartridge as big as the .50 BMG takes a tool made for the job, and this RCBS collet is exactly that. It drops into the RCBS 1-1/2-inch-12 Bullet Puller and clamps down on the bullet so you can draw it straight out of the case. If you've ever had a questionable load, a crimp that didn't go right, or just want to reclaim a stack of pricey .510 projectiles, this is how you take the round apart without wrecking the pieces you want to keep.
What the .50 BMG Collet Does
The collet is the part that does the actual gripping. When you run the press, it holds the bullet firmly while the case gets pulled away from it, letting you salvage the bullet, powder, and brass for another go. For anyone loading big-bore rounds where components aren't cheap or easy to come by, being able to recover good projectiles instead of tossing a bad round makes a real difference over a reloading season.
Fitting the RCBS Bullet Puller Collet
This is a collet only, not the complete puller, so you'll need the RCBS 1-1/2-inch-12 Bullet Puller body to use it. That larger thread size is specific to the big-bore setup, so it won't swap into the standard 7/8-14 pullers used for common rifle and pistol calibers. It's designed to run with the AmmoMaster-2 and the AmmoMaster .50 BMG press, which is the platform most folks loading this round are already working on.
Built for the .510 Bore
Machined for the .50 Caliber (.510) bullet, the collet is sized to grab that diameter cleanly and hold it through the pull. RCBS has a long track record with reloading gear, and a dedicated collet like this takes the guesswork out of disassembling the largest cartridge most reloaders will ever touch. It's a straightforward piece of kit that earns its place on the bench the first time you need to break a round down.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9448
- UPC: 076683094483
- Caliber: .50 Caliber (.510) / .50 BMG
- Thread Size: 1-1/2-inch-12
- Compatible Puller: RCBS 1-1/2-inch-12 Bullet Puller
- Compatible Presses: AmmoMaster-2, AmmoMaster .50 BMG
- Material: Steel
- Country of Origin: USA
- Shipping Weight: 0.1688 lbs
What’s Included
- RCBS .50 BMG Bullet Puller Collet (1-1/2-12 thread)
Frequently Asked Questions
Does this RCBS .50 BMG collet include the bullet puller itself?
No, this is the collet only. You'll need the RCBS 1-1/2-inch-12 Bullet Puller body to use it. The collet threads into that puller and grips the bullet while the case is drawn away.
Will this collet work with a standard RCBS bullet puller?
It won't. This collet uses the larger 1-1/2-inch-12 thread made for the big-bore setup, not the standard 7/8-14 thread used on common rifle and pistol pullers. It's built specifically for the AmmoMaster-2 and AmmoMaster .50 BMG press platforms.
What does the RCBS bullet puller collet do?
It clamps onto the bullet so you can pull apart a loaded .50 BMG round without damaging the pieces. That lets you salvage the bullet, powder, and brass to reuse down the road. It's the part of the puller that actually does the gripping.
What bullet diameter does this collet fit?
It's machined for the .50 Caliber (.510) bullet used in the .50 BMG. The collet is sized to grab that diameter cleanly and hold it steady through the pull.




Reviews
There are no reviews yet.