Description
The RCBS Steel Neck Die Bushing .290 is one of those small parts that makes a big difference on the loading bench. It drops into RCBS Gold Medal Match bushing dies and lets you set the exact amount of neck tension you want on the bullet, rather than being stuck with whatever a standard full-length die happens to give you. The .290 refers to the inside diameter of the bushing in inches, so matching it to your brass and bullet combo is the whole game.
These bushings are self-centering, which helps keep the neck true to the body of the case and cuts down on runout. Because the bushing only works the brass as much as it needs to, you get less work hardening at the neck, which translates to brass that lasts longer and more uniform tension from one loaded round to the next. Bench rest and long range precision folks have leaned on this style of changeable bushing for years, and the benefits really show when you pair it with quality brass and turned necks.
Getting the Right Fit with the .290 Neck Bushing
Sizing selection is simple once you know the trick. Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 of an inch, which accounts for brass spring back and leaves you roughly .001 of neck tension. You can also measure neck wall thickness, double it, add your bullet diameter, then subtract .001. RCBS recommends keeping a bushing or two above and below your target so you can fine tune as your brass and load develop.
Why Reloaders Reach for the RCBS Steel Neck Die Bushing
Made in the USA from steel, this .290 bushing uses the standard sizing bushing design found in RCBS Gold Medal Match dies, and it works in both full length and neck sizing setups. If you already run Redding, Wilson, or Hornady bushings, those will fit RCBS Gold Medal bushing dies too, so building out a range of sizes is easy. It is a straightforward, durable piece that earns its spot in any precision reloader's kit.
Key Specifications
- Brand: RCBS
- Bushing Diameter: .290 in
- Material: Steel
- Manufacturer Part Number: 81605
- UPC: 076683816054
- Fits: RCBS Gold Medal Match bushing dies
- Sizing Styles: Full length and neck sizing
- Self-Centering: Yes
- Shellholder Included: No
- Country of Origin: USA
- Shipping Weight: 0.1 lb
What’s Included
- One RCBS Steel Neck Die Bushing, .290 diameter
Frequently Asked Questions
What dies does the RCBS Steel Neck Die Bushing .290 work with?
It is made for RCBS Gold Medal Match series bushing dies and works in both the full length and neck sizing styles. Redding, Wilson, and Hornady bushings are also compatible with RCBS Gold Medal bushing dies, so you can mix brands if needed.
How do I know if .290 is the right bushing size for my load?
Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 of an inch to account for brass spring back. You can also measure neck wall thickness, multiply by two, add your bullet diameter, then subtract .001. If that math lands on .290, this is your bushing.
Why would I use a neck bushing instead of a standard sizing die?
A bushing lets you control exactly how much neck tension you put on the bullet instead of being locked into a fixed amount. Because it only sizes the neck as much as needed, it reduces work hardening of the brass, which extends case life and improves consistency round to round.
Should I buy more than one bushing size?
RCBS recommends keeping a bushing or two above and below your target diameter. Having .289 and .291 on hand alongside the .290 lets you fine tune neck tension as your brass changes with use or as you develop a load.




Reviews
There are no reviews yet.