Description
Blowback is the thing most people complain about after running a can on an AR, and it is the thing the Radical Defense LS-5 was built to solve. The whole suppressor is 3D printed as one monolithic piece from Haynes 282, a nickel-based superalloy that holds its strength at temperatures where common stainless designs start to give up. That single-piece construction means no welds to crack and no baffles to walk loose, and the design is rated for sustained full auto fire. Radical Defense pairs that with forward venting and assist ports that bleed gas out the front of the can instead of shoving it back through your action, so you get less gas in your face, a calmer cyclic rate, and a cleaner-running rifle.
What Sets the LS-5 Apart
Plenty of low-backpressure suppressors trade away sound performance to get there. The LS-5 manages to stay quiet at both the muzzle and the ear while keeping gas blowback close to nil, which is a tough combination to pull off. It also wears a proprietary IR non-reflective black coating that cuts visibility under night vision, and the corrosion-resistant alloy handles salt air environments without a fuss. At 7.5 inches long, 1.75 inches in diameter, and 20 ounces, it is a full-size can sized for people who want maximum decibel reduction rather than the smallest possible package.
Mounting the Radical Defense LS-5
Radical Defense includes everything you need to get running. The KFM taper mount flash hider in 1/2×28 threads onto standard 5.56 barrels with no modification to the host gun, and the included 1.375×24 HUB adapter means the LS-5 plays nicely with the wide world of HUB-compatible mounts if you want to set it up differently down the road. The taper mount locks up tight and returns to position consistently, which matters when you care about your zero.
For hard-use carbines, short-barreled setups, and anyone tired of eating gas behind a suppressed AR, the LS-5 is a serious piece of engineering that earns its spot on the muzzle.
Key Specifications
- Model: LS-5
- Manufacturer Part Number: LS5
- UPC: 814034028370
- Caliber: .223 Rem / 5.56 NATO
- Material: Haynes 282 nickel-based superalloy, 3D printed monolithic
- Length: 7.5 in (190.5 mm)
- Diameter: 1.75 in (44.45 mm)
- Weight: 20.0 oz
- Attachment Method: 1.375×24 HUB mount with KFM taper mount flash hider
- Thread Pattern (Flash Hider): 1/2×28
- Finish: Proprietary IR non-reflective coating, Black
- Full Auto Rated: Yes
- Venting Design: Forward venting with assist ports for reduced blowback
- Corrosion Resistance: Salt air resistant
What’s Included
- Radical Defense LS-5 suppressor
- KFM taper mount flash hider, 1/2×28
- 1.375×24 HUB adapter
Frequently Asked Questions
Does the Radical Defense LS-5 really reduce blowback on an AR-15?
Yes, and it is one of the main reasons people pick this can. The forward venting design and assist ports push gas out the front of the suppressor instead of back into the receiver, so you get noticeably less gas to the face and a cleaner-running gun. Unlike some low-backpressure designs, it does this without giving up much in the way of sound suppression at the ear or the muzzle.
What mounts does the LS-5 work with?
It ships with a KFM taper mount flash hider in 1/2×28 and a 1.375×24 HUB adapter, so it is ready to go on a standard 5.56 barrel right out of the box. Because it uses the industry-standard HUB pattern, you can also run it with a wide range of HUB-compatible mounts from other makers if your setup calls for it. No modification to the host rifle is needed.
Is the LS-5 rated for full auto and short barrels?
It is. The Haynes 282 superalloy used in this suppressor is the same class of material found in jet engine components, and it keeps its strength under the extreme heat of sustained full auto fire. The one-piece 3D-printed monolithic construction also eliminates welds and loose baffles, making it a solid choice for hard-use and high-volume shooting.
How do I clean and maintain the Radical Defense LS-5?
The LS-5 is a sealed monolithic design, so there are no baffles to disassemble. Centerfire rifle rounds like 5.56 burn hot enough that the can largely keeps itself clear of buildup, so maintenance mostly comes down to keeping the mounting surfaces and threads clean and lightly greased. Wipe down the exterior after exposure to moisture or salt air and it will serve you for a long time.





Reviews
There are no reviews yet.