$999.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Hang a traditional welded-baffle .30 cal can on the end of an AR-10 and you feel it immediately. The Radical Defense SASSTi takes a different route. It is 3D printed as a single monolithic piece from Ti6Al4V aerospace titanium, so there are no welds, no stacked baffles, and no weak points, and the whole thing weighs right around 10 ounces. That is a serious weight savings on a precision gas gun, and it keeps your rifle balanced instead of nose-heavy.
The SASS family (short for Semi-Automatic Sniper System) was originally developed for the M110 and SR-25 platforms running 7.62 NATO, and that DNA shows. The forward venting monolithic core pushes gas out the front instead of back at you, which cuts felt back pressure and gas blowback, keeps the action running at a saner pace, and makes longer range sessions a lot more pleasant behind a semi-auto. Beyond sound, the design works on the full signature package: flash, thermal, and ground disturbance all get knocked down.
At 7.75 inches long with a 1.75 inch max diameter tapering to 1.6 inches, the SASSTi keeps a compact, snag-free profile on the muzzle. This FDE version wears a proprietary IR non-reflective coating over the titanium, so it will not glow like a beacon under night vision or shine in the sun. Mounting is handled through an industry-standard 1.375×25 HUB pattern, and Radical includes their KFM taper lock flash hider in 5/8×24 in the box, so you can go from delivery to the range without hunting down extra hardware. The taper lock interface gives you solid, repeatable lockup for consistent point of impact.
This is the titanium version of the SASS, built for semi-auto fire on .30 caliber and 7.62 NATO hosts. If you are running a gas gun for hunting, precision matches, or general range work and want a durable can that will not weigh down the front of your rifle, the SASSTi checks the right boxes without asking you to babysit it.
It was developed around the M110 and SR-25 style platforms in 7.62 NATO, so semi-auto .30 cal gas guns like the AR-10 are its home turf. It also works well on bolt guns in .308 and similar .30 caliber cartridges. The 5/8×24 KFM flash hider in the box covers the most common .30 cal muzzle threading.
The standard SASS is printed from Haynes 282 nickel superalloy and runs about 20 ounces, while the SASSTi uses Ti6Al4V titanium and cuts that in half to roughly 10 ounces. The trade-off is firing schedule: the titanium version is intended for semi-auto fire rather than the sustained full-auto abuse the Haynes model is built to take. For most hunting and precision rifle use, the weight savings is the better deal.
Yes, it uses the industry-standard 1.375×25 HUB pattern, and Radical includes their HUB mount and a KFM 5/8×24 taper lock flash hider with the suppressor. That HUB compatibility means you can swap in a wide range of aftermarket mounts down the road if your setup changes.
That is one of its stronger points. The forward venting monolithic design pushes gas out the front of the can and uses assist ports to reduce back pressure, so you get less gas to the face and a more manageable cyclic rate on gas guns. It also handles flash and thermal signature well thanks to the design and the IR non-reflective coating.
| UPC | 814034028899 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SASSTI-FDE |
| Caliber/Gauge | 30 |
| Shipping Weight | 1.7 |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.