Description
Radian Weapons teamed up with TriggerTech to build the Vertex CBX, and the result is one of the more refined single-stage triggers you can drop into an AR-15 lower. The heart of it is a curved trigger bow set slightly forward of where a standard trigger sits. That small shift makes a real difference, encouraging a straight-back press and cutting down on the left-and-down or right-and-down pull tendencies that throw shots off. If you index the pad of your finger on the trigger, the curved shoe is going to feel right at home.
What Sets the Vertex CBX Apart
This trigger runs TriggerTech's Zero Creep internals, which swap out traditional sliding sear engagement for a roller-based system. Instead of the hammer hook dragging across the sear, a precision roller sits at the interface and turns that sliding friction into rolling contact. The payoff is a break that feels like snapping a glass rod. There's a short pre-travel to a defined wall, a clean break with no grit or stacking, minimal overtravel, and a short, tactile reset for fast follow-up shots. It's a true 3.5 pound single-stage pull that stays consistent shot after shot.
Built to Stay Consistent
The internal components are made from hardened 440C stainless steel, which resists corrosion without leaning on coatings or constant lubrication. That means your trigger feel holds up across thousands of rounds instead of drifting as coatings wear. The whole assembly lives in a self-contained cassette housing, and the design helps prevent pin walkout even when you're running standard hammer and trigger pins.
Dropping the Vertex CBX Into Your Build
Installation is about as simple as it gets. Knock out your existing hammer and trigger pins, set the cassette into the lower, and push the standard mil-spec 0.154 inch pins back through. No fitting, no adjustment, no special tools. Whether you're finishing a range gun, a competition setup, or a duty-style build, the Vertex CBX gives you premium single-stage performance without switching away from the curved shoe you already like.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Vertex CBX Curved
- Manufacturer Part Number: R0927
- UPC: 810098421164
- Color: Black
- Trigger Type: Single-Stage
- Trigger Bow: Curved
- Pull Weight: 3.5 lb
- Trigger Technology: TriggerTech Zero Creep with roller sear
- Internal Material: 440C Stainless Steel
- Housing: Self-contained cassette
- Pin Size: Mil-spec 0.154 in
- Platform Compatibility: AR-15
- Reset: Short, tactile
What’s Included
- Radian Vertex CBX curved single-stage trigger (cassette assembly)
- Standard mil-spec 0.154 in hammer and trigger pins
Frequently Asked Questions
What pull weight does the Vertex CBX trigger have?
The Vertex CBX is a true single-stage trigger with a 3.5 pound break. Thanks to the TriggerTech Zero Creep internals, that break stays crisp and repeatable from the first press to the last. You get a short pre-travel to a defined wall, then a clean release with almost no overtravel.
Is the Vertex CBX a drop-in trigger, and is it hard to install?
Yes, it's a self-contained cassette that drops right into a mil-spec AR-15 lower. Just remove your old hammer and trigger pins, set the cassette in place, and push the standard 0.154 inch pins back through. No fitting, tuning, or special tools needed, and the design helps guard against pin walkout.
What's the difference between the Vertex CBX and the FBX?
The CBX uses a curved trigger bow while the FBX has a flat face, but both share identical TriggerTech internals and the same 3.5 pound break. Pick the CBX if you like a traditional curved shoe and index with the pad of your finger. The FBX is the way to go if you prefer a flat, vertical contact surface.
Will the Vertex CBX fit my AR-15 lower?
It's built for standard mil-spec AR-15 lower receivers and uses common 0.154 inch pins. The cassette design means there's no adapter or gunsmithing required for a typical lower. If your lower takes standard trigger and hammer pins, you're good to go.





Reviews
There are no reviews yet.