$109.95
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The standard AR-15 charging handle has one weak spot most people just live with: that tiny single-side latch that demands a precise two-finger pinch to run. The Radian Raptor throws that out the window. Big, deeply textured latches sit on both sides of the handle, so you can rip the bolt back with a palm blade or a quick thumb-and-finger grab from either the strong or support side. It's the kind of upgrade you feel the first time you charge the rifle and then wonder how you ever ran without it.
Everything about this handle is built to move fast and stay put. The oversized levers are easy to find in low light and just as easy to work with cold, wet, or gloved hands, which is exactly when you don't want to be fumbling. The edges are smoothly machined to cut down on snagging against your gear or a busy top rail, and there's enough spring tension in the wings to keep them from flopping around when you're not on them. Folks who've swapped over from a mil-spec or factory handle consistently mention how much more solid and robust it feels in the hand.
Radian machines the Raptor from aircraft-grade 7075 aluminum and finishes it in a mil-spec Type III hardcoat anodize, here in a clean Flat Dark Earth to match your build. It's made 100% in the USA and fits mil-spec AR-15 and M16 pattern uppers. The tolerances are tight, so it seats snug in the receiver channel with no slop. Installation is about as simple as it gets on an AR: pull the old handle, slide the Raptor in, done in a couple of minutes.
Worth noting that this is the original Raptor, not the ported Raptor-SD. It runs beautifully on a standard rifle, and while the snug fit helps keep some blowback in check, if you're chasing serious gas mitigation on a suppressed setup, the SD model is the one built specifically for that job.
Yes, the Raptor is designed to drop into any mil-spec AR-15 or M16 pattern upper receiver. Install takes a minute or two: remove your existing charging handle and slide the Raptor in. If your rifle uses a proprietary charging handle design, double-check the fit before ordering.
This is the original Raptor, and its tight tolerances and snug fit in the receiver channel help keep some blowback from leaking back toward you. That said, it isn't a dedicated gas-defeating handle. If your main goal is cutting gas on a suppressed build, the ported Raptor-SD model is the one engineered specifically for that.
A factory handle has one small latch that usually needs a two-finger pinch to run. The Raptor uses large, textured latches on both sides so you can palm-blade or thumb the bolt back one-handed from either side. The deep grooves are easy to locate in low light and work fine with wet, cold, or gloved hands.
It is. Radian machines the Raptor entirely in the USA from aircraft-grade 7075 aluminum and finishes it with a durable mil-spec Type III hardcoat anodize. That combination is a big part of why it holds up so well to hard use.
| UPC | 817093020521 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | R0003 |
| Color | CHARGING HANDLE |
| Length | 11.5 |
| Model | |
| Package Height | 1.0 |
| Package Width | 3.9 |
| Product Type | Accessory-Charging Handles |
| Shipping Weight | 0.18 |
| Units per Box | 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.