$150.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Plan-B Omega XL is Q's answer to a simple problem: you want the quick, repeatable taper lockup of the Cherry Bomb system, but your suppressor is a HUB can, not a Q can. This mount bridges that gap. It threads into any suppressor with the industry standard 1.375×24 HUB interface and mates to the Cherry Bomb XL muzzle brake using matched tapered surfaces on both parts. The result is a tight, self-aligning connection with plenty of contact area, so your can stays put and stays concentric without any of the usual mounting hardware.
Most quick-attach mounts rely on latches, springs, or ratchet teeth, and those are all parts that wear out or work loose. The Plan-B design skips the gimmicks entirely. There are no shims or crush washers, no timing the muzzle device, nothing to fiddle with. Thread the Cherry Bomb XL onto your barrel, spin the can on, and the tapers do the rest. As a bonus, the taper interface seals off your muzzle threads from carbon, so the can comes off cleanly even after a long range day.
This is the XL version of the Plan-B, built specifically for the larger Cherry Bomb XL brake (M18x1.5), which is the setup you'll see on big bore builds like 8.6 Blackout. On the suppressor side, it fits HUB cans including the SilencerCo Omega 300, Harvester Big Bore 338, and Hybrid, plus the Dead Air Nomad, Energetic Armament VOX, YHM Turbo K, and Banish 338, among others. Keep in mind the standard Plan-B mounts do not fit the Cherry Bomb XL, so if you're running the XL brake, this is the one you want.
Construction is heat treated 17-4 stainless steel with Q's signature copper finish, and at just a couple ounces it won't throw off your rifle's balance. Installation uses the same tools that shipped with your suppressor, so there's nothing extra to buy.
It fits any suppressor with the industry standard 1.375×24 HUB mounting interface. That covers cans like the SilencerCo Omega 300, Harvester Big Bore 338, and Hybrid, the Dead Air Nomad, Energetic Armament VOX, YHM Turbo K, and Banish 338. If your can accepts HUB mounts, this will thread right in.
This XL version is made specifically for the Cherry Bomb XL brake with its larger M18x1.5 taper. The regular Plan-B mounts pair with the standard Cherry Bomb, and they do not interchange with the XL brake. Match the mount to the brake you're running and you're set.
No shims, washers, springs, or timing needed. The taper interface handles alignment and lockup on its own. You'll just use the mount installation tools that came with your suppressor to swap this in place of your existing HUB mount.
That's the whole point of the taper system. The matched tapers on the mount and brake give a large contact area for a concentric, repeatable lockup, and they seal the muzzle threads off from carbon fouling. Cans on taper mounts like this come off cleanly instead of getting carbon-welded in place.
| UPC | 850035705834 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ACC-PLANB-OMEGA-XL |
| Color | COPPER |
| Length | 5 |
| Model | |
| Package Height | 1.3 |
| Package Width | 3.6 |
| Product Type | Accessory-Muzzle Brakes |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.