$150.00
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you own an ASR-pattern suppressor and you're tired of fighting the factory mounting system, the Plan-B ASR from Q is the fix. This mount threads directly into ASR-compatible cans like the SilencerCo Saker 7.62, Saker 5.56, Omega 36M, and Chimera 300, converting them to run on Q's taper mount interface with the Cherry Bomb muzzle brake. The result is a simpler attachment with fewer moving parts, better alignment, and a lockup you can trust shot after shot.
The magic is in the mating tapers. Both the Plan-B mount and the Cherry Bomb brake are cut with matching taper surfaces, so when you spin the can on, metal seats against metal over a large contact area. That does three things at once: it centers the suppressor on the bore for consistent point of impact, it locks everything up tight so the can stays put, and it shields the threads from carbon buildup. There are no shims, crush washers, latches, or springs anywhere in the system, and you never have to time the muzzle device. Fewer parts means fewer things to wear out or work loose.
The Plan-B ASR is machined from heat treated 17-4 stainless steel and wears a copper finish, coming in at a feathery 2.3 ounces while adding barely any length to your setup. Installation is straightforward too. Thread it into your suppressor using the wrench that came with your can, torque it down, and from then on mounting is a quick twist onto any Cherry Bomb equipped barrel. It's rated for .30 caliber use, so one can can hop between your 5.56 and .308 rifles without a second thought.
If you're already invested in Cherry Bomb brakes for Q cans like the Trash Panda or Thunder Chicken, this mount folds your ASR suppressor into the same ecosystem. One mounting standard across the whole safe, consistent lockup on every rifle, and no more wondering if your can is seated right before you send it.
This version of the Plan-B is made for ASR-pattern suppressors, which covers the SilencerCo Saker 7.62, Saker 5.56, Omega 36M, and Chimera 300, among other cans built on the same ASR interface. If your suppressor uses a different rear mount pattern like Alpha or Bravo/HUB, Q makes separate Plan-B versions for those. It's worth double checking your can's mount pattern before ordering.
Yes, the Plan-B ASR is designed to lock onto Q's Cherry Bomb muzzle brake, and the brake is sold separately. The two parts share matching taper surfaces, which is what gives the system its alignment and repeatable lockup. The Cherry Bomb comes in 1/2×28 and 5/8×24 thread pitches to cover most 5.56 and .30 caliber barrels.
Remove your existing ASR mount, then thread the Plan-B into the back of the can and torque it to spec using the mount wrench that came with your SilencerCo suppressor. Once it's installed, attaching the can to any Cherry Bomb equipped rifle takes just a couple of twists. No shims, washers, or timing of the muzzle device are needed at any point.
The taper-on-taper contact between the Plan-B and the Cherry Bomb seats the suppressor the same way every time, which is exactly what you want for consistent point of impact. The large contact area also keeps carbon off the threads, so the mount stays smooth and repeatable over time. This is one of the main reasons folks switch over from ratchet or spring style mounting systems.
| UPC | 850000857308 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | PLAN-B-ASR |
| Caliber/Gauge | .30 Carbine |
| Length | 5.5 |
| Model | |
| Package Height | 1.0 |
| Package Width | 3.5 |
| Product Type | Accessory-Muzzle Brakes |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.