$60.00
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Q-SERT Atlas Bipod Mount is a purpose-built adapter that lets you run an Atlas BT10-NC V8 bipod directly on the Q-Sert handguard found on Q rifles like The Fix, Sugar Weasel, and Honey Badger. Rather than adding a rail section and stacking hardware, this piece bridges straight from the Atlas base to the Q-Sert slot, so you get a clean, tight interface with nothing hanging off the front end you don't need.
Machined from 7075-T6 aluminum and wearing a clear hardcoat anodized finish, this mount is stout where it counts and barely registers on the scale at roughly 0.6 ounces. That kind of weight is a non-issue on a lightweight Q build, and the hardcoat holds up to weather and field abuse without babying it. Folks who've run it report the fit mates up cleanly with the Atlas base and stays locked in after a solid range session, screws still snug and everything where you left it.
Install hardware comes in the box, and a couple of the mounting screws show up with factory thread locker already applied. You'll want a T-25 Torx wrench, a 3/32 Allen wrench, and a dab of blue Loctite on hand to finish the job right. It's a quick bench setup, and once it's torqued down you've got a direct, repeatable bipod platform.
This is the mount only, so plan on supplying your own Atlas BT10-NC V8 bipod. If you're shooting prone off a Q rifle and want a bipod that sits low and doesn't throw off the balance of a gun that was built to be light in the first place, this is the piece that ties it all together.
No, this is the mount only. It's the adapter that attaches an Atlas BT10-NC V8 bipod directly to a Q-Sert handguard, so you'll need to supply your own Atlas bipod. Think of it as the bridge between the two.
It's designed for Q firearms that use the proprietary Q-Sert handguard system, including The Fix, Sugar Weasel, and Honey Badger. If your rifle runs a Q-Sert handguard, this mount is made to interface with it directly.
You'll want a T-25 Torx wrench and a 3/32 Allen wrench to get it torqued down. A little blue Loctite on the threads is a good idea for keeping things locked under recoil. The mounting hardware itself is included in the box, and some screws arrive with factory thread locker already applied.
Yes. The 7075-T6 aluminum and clear hardcoat anodized finish give it a strong, corrosion-resistant build that handles field use and range time. Users report it stays tight and holds zero after extended shooting, with the mount and Atlas base mating up cleanly.
| UPC | 850000857414 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ATLAS-MOUNT-1 |
| Length | 2.7 |
| Package Height | 3.4 |
| Package Width | 3.5 |
| Product Type | Accessory-Parts |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.