0
0

Q LLC Flash Hider 3/4×24 7.62 for Thunder Chicken & Trash Panda

UPC: 850000857711

$125.00

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Running a Thunder Chicken or Trash Panda? This is the mount you want on any 7.62 barrel threaded 3/4×24. The Q Flash Hider is part of Q's Quickie Fast-Attach system, which means your suppressor spins on and locks up in seconds with no fiddly latches or extra hardware. When the can comes off, you're left with a proper three-prong flash hider doing real work at the muzzle instead of a bare thread protector.

Built the Q Way

Q machines this flash hider from 17-4 stainless steel, and the whole thing weighs just 2.1 ounces with an overall length of 2.13 inches. That matters on a lightweight build where every ounce at the muzzle changes how the rifle handles. The prong design does a solid job knocking down flash signature during low-light shooting, and it doubles as the taper interface your Q suppressor seats against for consistent, repeatable lockup.

Installing the Q 3/4×24 Flash Hider

Install is about as painless as muzzle devices get. The 7/8 inch wrench flats give you a real surface to torque against, so there's no wrestling with crush washers or shim kits. Pull the old device, clean and degrease the threads, add a dab of Rocksett, and torque it to 40 ft-lbs with a thin wrench. One thing worth knowing before you order: these threads are not tapered, so make sure that matches your barrel. Q offers this flash hider in a few thread patterns, and this 3/4×24 version is the one built for 7.62 bores.

Why Pair It With Your Q Suppressor

If you own multiple rifles, picking up a flash hider for each host is the smart play. Leave one torqued on every barrel and your suppressor moves between guns as fast as you can thread it on. It's a clean, simple mounting system from a company that builds some of the most popular 30 cal cans out there, and it just plain works.

Key Specifications

  • Manufacturer: Q LLC
  • Manufacturer Part Number: ACC-FH-3/4-24
  • UPC: 850000857711
  • Model: Flash Hider
  • Thread Pattern: 3/4"x24 (non-tapered)
  • Bore / Caliber: 7.62mm / .30 Cal
  • Material: 17-4 Stainless Steel
  • Weight: 2.1 oz
  • Overall Length: 2.13 in
  • Wrench Flats: 7/8 in
  • Suppressor Compatibility: Q Thunder Chicken, Q Trash Panda (Quickie Fast-Attach)
  • Recommended Install Torque: 40 ft-lbs with Rocksett

What’s Included

  • Q 3/4×24 Flash Hider

Frequently Asked Questions

Which suppressors work with the Q 3/4×24 Flash Hider?

This flash hider is built for Q's Quickie Fast-Attach system, so it mounts the Thunder Chicken and Trash Panda silencers. Leave one on each host barrel and your can moves between rifles in seconds. It also works fine as a standalone flash hider when you're shooting unsuppressed.

Are the threads on this Q flash hider tapered?

No, this version uses standard non-tapered 3/4×24 threads. That's worth double checking against your barrel before ordering, since some precision barrels are cut with tapered muzzle threads. If your barrel has a straight 3/4×24 thread with a 7.62 bore, you're good to go.

How do I install the Q 3/4-24 Flash Hider?

Remove any existing muzzle device along with shims or crush washers, then clean and degrease the barrel threads. Apply Rocksett to the device and torque it to 40 ft-lbs using a thin wrench on the 7/8 inch flats. No crush washer is needed, and Rocksett is not included in the package.

What is this flash hider made of and how much does it weigh?

Q machines it from 17-4 stainless steel, which holds up well to heat and blast at the muzzle. It weighs 2.1 ounces with an overall length of 2.13 inches, so it adds very little weight or length to your rifle.

Additional information

UPC

850000857711

Manufacturer

Manufacturer Part Number

ACCFH3/4-24

Model

Thread Pattern

3/4"x24

Reviews

There are no reviews yet.

Be the first to review “Q LLC Flash Hider 3/4×24 7.62 for Thunder Chicken & Trash Panda”