$500.00
21 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Q built this kit for the folks who bought a Honey Badger early and want it running exactly like the latest ones off the bench. If your rifle was built before 2026, it likely still has the original recoil setup, and this package swaps in Q's current-generation two-piece bolt carrier group along with the updated buffer parts. The result is the same smarter engineering and smoother operation Q is putting in every new gun, brought to the rifle you already own.
The heart of the kit is that two-piece BCG. Instead of the usual one-piece carrier fighting for room in a short receiver, Q integrates the buffer function right into the carrier, which shortens the recoil stroke and keeps the whole platform compact without giving up reliability. The two halves are machined separately for tighter tolerances, and there's tungsten packed into the rear to kill bolt bounce, which is the one gremlin that used to nag the short-barreled guns. The design also does away with the fussy firing pin retaining pin, so you get one less small part to lose and one less thing to break.
Beyond the carrier, you're getting the pieces that make the newer recoil system tick: an updated buffer spring, a buffer spring plate, and an end cap screw. Together these convert an original-spec Honey Badger over to the current configuration, which owners have been chasing specifically to smooth out cycling and cut down on that bolt bounce.
This one is aimed squarely at .300 Blackout Honey Badgers built before 2026 that still wear the original small-diameter recoil spring and guide. It is not meant for the newest guns that already ship with the two-piece BCG, and it is not a general AR-15 part. Installation is well within reach of a competent armorer, and field stripping the finished setup stays simple thanks to the single cross pin that retains the carrier. If you love your original 'Badger and want it feeling factory-fresh, this is the clean way to get there.
It is built for .300 Blackout Honey Badgers made before 2026 that still run the original recoil system, which you can spot by the small-diameter recoil spring and the guide in the receiver extension. It is not for the newest guns that already ship with the two-piece BCG, and it will not work in a standard AR-15. If your rifle already has the updated carrier, you would only need the BCG on its own rather than the full kit.
Q integrates the buffer function into the carrier itself, which shortens the recoil stroke and keeps the platform compact while staying reliable. The two halves are machined separately for tighter tolerances, and tungsten in the rear helps put a stop to bolt bounce, especially noticeable on the short barrels. Owners upgrade specifically for smoother cycling and to quiet that bounce down.
Q notes the installation can be handled by a competent armorer, so if you are comfortable working on your own rifle and have the right tools, it is a reasonable job. Once it is together, the two-piece design keeps field stripping simple since the carrier is held by a single cross pin. If you would rather not tackle it yourself, any qualified gunsmith can do the swap.
You get the two-piece bolt carrier group plus the buffer parts that complete the conversion: an updated buffer spring, a buffer spring plate, and an end cap screw. Together these bring an original-spec Honey Badger over to the current recoil configuration.
| UPC | 810152961520 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ACC-HB-BCG-2PC-MP-UP |
| Shipping Weight | 0.995 |
You must be logged in to post a review.
Reviews
There are no reviews yet.