$50.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is one of those parts nobody thinks about until they need it. The Q Honey Badger Barrel Nut is the direct-fit replacement for the barrel nut that comes with the Q Honey Badger handguard, and its job is simple but important: it clamps the handguard to the upper receiver and keeps your barrel indexed where it should be. If you're building a Honey Badger from parts, swapping a rail, or just want a backup in your parts bin, this is the correct piece for the platform.
Q machines it from 7075-T6 aluminum, the same high-strength alloy used across quality AR components, so it handles the stress of repeated firing and heat cycles without giving up much weight. The clear anodized finish adds corrosion resistance and surface hardness to protect the threads over time, and it wears a subdued gray tone that blends right in with the rest of a Honey Badger assembly.
This nut is designed for the Q Honey Badger handguard system and works with Honey Badger and standard M4/AR-15 pattern upper receivers. It uses right-hand threads and gets torqued to 50 ft-lbs during install. Worth knowing before you start: the Honey Badger barrel nut is meant to be tightened with Q's own Honey Badger Multi-Tool, which carries the correct 1.25-inch wrench interface. Using the right tool keeps the finish clean and gets you to spec without buggering up the nut.
Installation is straightforward for anyone comfortable working on an AR, but torque discipline matters here. Set it to 50 ft-lbs with a torque wrench and the proper adapter, and you get a solid, repeatable interface between the barrel, handguard, and receiver. That solid connection is what keeps everything aligned, which matters even more when you're running lights, lasers, or optics off the rail. Built to spec and made to last, it's the kind of small component that quietly does its job for years.
It secures the Q Honey Badger handguard to the upper receiver and keeps the barrel properly aligned within the system. Think of it as the anchor point that ties the barrel, rail, and receiver together. A solid, correctly torqued nut keeps everything indexed the way it should be, which matters for consistency with rail-mounted gear.
Yes. It's made for the Q Honey Badger handguard system and works with Honey Badger and standard M4/AR-15 pattern upper receivers. It uses right-hand threads like a typical AR barrel nut.
Q designed it to be tightened with the Honey Badger Multi-Tool, which has the correct 1.25-inch wrench interface for the nut. Using the proper tool helps you hit the 50 ft-lbs torque spec cleanly and avoids marring the finish. A torque wrench with the right adapter is strongly recommended so you don't over or under tighten.
Torque it to 50 ft-lbs during installation. Getting this right gives you a secure, repeatable connection between the barrel, handguard, and receiver. Skipping a torque wrench here is a common mistake, so take the extra minute to do it by the numbers.
| UPC | 850000857421 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | NUT-BARREL-HB |
| Color | Gray |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.