Description
The PWS MK109 Mod 2-M takes everything people love about the AR-15 and swaps the direct impingement guts for the long-stroke piston system PWS built its reputation on. Chambered in .300 AAC Blackout with a 9.75" barrel and a 1:8 twist, this complete upper is dialed in for a short, handy package that stabilizes everything from lightweight supersonic loads to heavy subsonic rounds. Because the operating rod is tied directly to the bolt carrier group and rides in a protected sleeve, the recoil impulse feels more like a smooth push than a snap, and carbon stays out of the action instead of dumping back into your receiver.
What Sets the MK109 Mod 2-M Apart
The Mod 2-M line drops the forward assist, adds a flared mag well and integrated trigger guard, and wraps the barrel in a free-float PicLok handguard. PicLok is PWS's own take on accessory mounting that lets you attach both M-LOK and Picatinny gear right on the rail, so you're not boxed into one system when you set up lights, lasers, or grips. The whole thing is built on a T6 7075 forged receiver with an anodized finish, and it fits any standard AR-15 lower.
Built With Suppressors in Mind
.300 Blackout and cans go together like peanut butter and jelly, and this upper leans right into that. The 3-position adjustable gas system is reachable through a cutout in the handguard, so you can tune gas flow on the fly: one setting for unsuppressed shooting, and the others for running quiet with lighter or heavier loads. Turning down the gas cuts back pressure and blowback, which means less gas in your face and longer stretches between deep cleanings. The barrel is threaded 5/8×24 and ships with the PWS Triad muzzle device installed and threaded, not pinned and welded.
Ready to Run Out of the Box
A Radian Raptor ambidextrous charging handle comes standard, giving you fast, positive cycling from either side. PWS backs the piston system for the life of the upper, and folks who've run these tend to point to the accuracy, reliability, and how clean the action stays after a long day at the range.
Key Specifications
- Model: MK109 Mod 2-M
- Manufacturer: Primary Weapons Systems
- Manufacturer Part Number: MK1-M2U-300BLK-9
- UPC: 811154033192
- Caliber: .300 AAC Blackout
- Barrel Length: 9.75"
- Twist Rate: 1:8
- Gas System: Long-Stroke Piston, 3-Position Adjustable
- Muzzle Thread: 5/8×24
- Muzzle Device: PWS Triad (threaded, not pinned)
- Handguard: 8.9" PWS PicLok M-LOK Free-Float
- Charging Handle: Radian Raptor Ambidextrous
- Receiver Material: T6 7075 Forged
- Finish: Anodized Black
- Fit: Standard AR-15 Lower
- Product Type: Complete Upper
What’s Included
- PWS MK109 Mod 2-M complete upper receiver
- PWS Triad muzzle device (installed)
- 8.9" PWS PicLok M-LOK free-float handguard
- Radian Raptor ambidextrous charging handle
Frequently Asked Questions
Will the MK109 Mod 2-M fit any AR-15 lower?
Yes, this complete upper is configured to fit any standard AR-15 lower receiver. Just pop it on, run the correct bolt catch and takedown pins, and you're set. Keep in mind the Mod 2-M drops the forward assist, so the top of the receiver runs clean on that side.
How does the adjustable gas system work on this upper?
The PWS long-stroke piston uses a 3-position adjustable gas block you reach through a cutout in the handguard. Position one is for unsuppressed shooting, while the other settings tune the gas down for suppressed use with lighter or heavier loads. There's also a maintenance position for tool-free disassembly, and you can adjust it with the tip of a bullet.
Is the MK109 Mod 2-M good for running a suppressor?
It's built for it. The piston system keeps carbon out of the action and the adjustable gas block lets you cut back pressure and blowback when a can is threaded on. Pair that with .300 Blackout subsonic loads and you've got a quiet, soft-shooting setup that stays cleaner far longer than a direct impingement upper.
Does the muzzle device come pinned and welded?
No, the PWS Triad muzzle device ships installed and threaded onto the 5/8×24 barrel, not pinned and welded. That means you can swap it out for a different muzzle device or thread on a compatible suppressor without any extra machining.







Reviews
There are no reviews yet.