$1,298.88
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Suppressor design has been baffles inside a tube for decades, and the PTR Vent 1 throws that playbook out. Instead of stacked baffles and welded joints, PTR prints the entire can as one monolithic piece of titanium, then uses their patented Purposely Induced Porosity (PIP) process to build a metal foam structure inside. That porous internal architecture gives expanding gas somewhere to go, which means quieter shots, better heat dissipation, and noticeably less back pressure coming back through your action. If you run a gassy semi-auto .308, that last part matters a lot. Less gas to the face, less carbon fouling, and a rifle that stays cleaner longer.
The numbers back up the design. Independent testing at PEW Science put the Vent 1 at a Suppression Rating of 57.3 on a Savage Model 10 in .308 with Federal XM80, which lands it among the top performers in the full-size .30 cal category. It measures 8.74 inches long with a 1.75 inch diameter and weighs just 12.3 ounces, so you get full-size suppression without hanging a boat anchor off your muzzle. The one-piece printed construction eliminates the failure points that plague traditional cans, and it carries a full-auto rating for hard use. A black PVD coating handles heat, erosion, and weather while keeping the exterior looking sharp.
The rear of the can uses the industry-standard 1-3/8"-24 HUB interface, and PTR includes a 5/8"-24 direct thread mount in the box. Spin it onto a threaded .308 bolt gun or AR-10 and you're ready to go, or swap in your favorite QD mount from the wide world of HUB-compatible options. That flexibility means the Vent 1 can move between hosts as your collection grows.
For precision rifles, semi-auto battle rifles, or anything chambered in 7.62×51, this is a modern can built on measurable performance rather than marketing. PTR backs it with a lifetime warranty, and it shows the kind of engineering you want screwed onto a serious rifle.
Independent testing at PEW Science gave the Vent 1 a Suppression Rating of 57.3 on a Savage Model 10 in .308 with Federal XM80 ammo, which puts it near the top of the full-size .30 caliber class. Beyond raw sound reduction, the PIP metal foam core also cuts back pressure significantly, so semi-autos run cleaner with far less gas blowback at the shooter's face.
Yes. The body uses the industry-standard 1-3/8"-24 HUB thread pattern, and it ships with a 5/8"-24 direct thread mount installed. If you prefer a quick-detach setup, you can swap in most any HUB-compatible mount on the market, which makes moving the can between different rifles simple.
The Vent 1 is built and rated for full-power 7.62×51 NATO and .308 Winchester, and it works across the broader .30 caliber family on appropriate hosts. It is also full-auto rated, so it handles demanding firing schedules on hard-use rifles without issue. Check with PTR for specific cartridge ratings if you plan to run magnum-class rounds.
It does, and that is one of the main reasons PTR built it this way. The suppressor is printed as a single monolithic piece, so there are no welds, separate baffles, or tube joints to fail under thermal stress. The porous PIP structure also spreads heat more efficiently than solid baffles, and the PVD coating protects the exterior from erosion and the elements.
| UPC | 897903003593 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | V1-3080101 |
| Caliber/Gauge | 7.62MM |
| Color | Black |
| Model | |
| Product Type | Suppressor |
| Thread Pattern | 5/8"-24 tpi |
You must be logged in to post a review.
Reviews
There are no reviews yet.