$999.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Swapping calibers or chasing better accuracy on your Tikka T3X used to mean a trip to the gunsmith. This Proof Research carbon fiber prefit in 6mm Creedmoor changes that. It arrives already chambered and threaded, so you can thread it onto a factory-spec T3X action, verify headspace with your gauges, torque it down, and be shooting the same afternoon. The 6mm Creedmoor is a favorite for a reason, sending fast, high-BC bullets with mild recoil that makes spotting your own hits easy at distance.
Proof starts with a full-profile, match-grade 416R stainless blank, turns it down to shed weight, then wraps it in aerospace-grade carbon fiber set in a proprietary resin. The payoff is a barrel that runs up to 64 percent lighter than a comparable steel contour while moving heat out of the bore faster. That heat management keeps groups tighter through longer strings and helps knock down mirage off the barrel during those extended range sessions. For anyone hauling a rifle up steep country, dropping a pound or two off the front end is a difference you feel all day.
The 24-inch length is a sweet spot for the 6 Creedmoor, giving you full velocity without turning the rifle into a boat anchor. The 1:7.5 twist is set up to stabilize the heavy 105 to 115 grain match bullets most 6CM shooters gravitate toward, so you get that flat-shooting, wind-bucking performance the cartridge is known for. It wears a Sendero contour and 5/8-24 muzzle threads, which is the standard pitch for the vast majority of brakes and suppressors, so mounting a muzzle device is plug-and-play.
Installation is straightforward for anyone comfortable with basic tools. You'll want a Tikka action wrench, a barrel vise, a torque wrench, and the correct go/no-go gauges. Clamp on the steel shank rather than the carbon wrap, torque to spec, and confirm headspace before you load a round. It's a genuine drop-in for factory-configured T3X actions, and it's also compatible with the Sako 85.
Yes, it's designed as a true shouldered drop-in for factory-spec T3X actions, so no gunsmithing is required. You thread it on, torque to spec, and verify headspace with go/no-go gauges. Keep in mind that if your action has been trued or had bolt face work done, headspace results can vary, so factory-configured rifles are the safe bet.
You'll want a Tikka-specific action wrench, a barrel vise, a torque wrench, and the correct 6mm Creedmoor go and no-go gauges. When you clamp the barrel, grip the steel shank rather than the carbon fiber wrap to avoid damaging it. Many owners run their T3X barrels in the 75 to 85 ft-lb range for non-magnum calibers, but confirm with Proof for your exact setup.
The 1:7.5 twist is dialed in for the heavier, high-BC bullets that make the 6mm Creedmoor shine, typically in the 105 to 115 grain range. That covers the popular match projectiles most 6CM shooters run for long-range work. It'll stabilize lighter bullets too, but the fast twist is really built to get the most out of the heavies.
Absolutely. It comes with 5/8-24 muzzle threads, which is the standard pitch for the majority of 6mm and .30 caliber brakes and suppressors on the market. Mounting your muzzle device is basically plug-and-play.
| UPC | 843068115206 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 115206 |
You must be logged in to post a review.
Reviews
There are no reviews yet.