$999.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Swapping a factory Tikka tube for one of these is one of the easier ways to turn a solid rifle into a serious one. This is a Proof Research prefit built for the Tikka T3x action in 6.5 PRC, cut to 22 inches with a Sendero contour and a 1:7.5 twist that stabilizes the heavy, high-BC bullets the 6.5 PRC was designed to sling. It shows up chambered and threaded with a 5/8-24 muzzle, so there's no shipping it off to a shop for weeks of chamber work.
What makes these barrels stand out is the construction. Proof starts with a full-profile, match-grade 416R stainless blank, turns it down to a slim contour, then filament-wraps it with aerospace-grade carbon fiber set in a heat-conducting resin. The result is a barrel up to 64 percent lighter than a comparable steel one, roughly ten times stronger than steel by weight, and far more resistant to dings, weather, and the mirage that comes off a hot barrel. On a mountain hunt or a long day behind the rifle, that weight savings and heat management pays for itself.
The 6.5 PRC likes barrel length to burn its powder, and 22 inches in the Sendero contour keeps velocity respectable while trimming ounces off the muzzle for a rifle that carries and points better. The 1:7.5 twist opens the door to the long 140-plus grain match and hunting bullets that make this cartridge a flat-shooting, wind-bucking performer out past distances where lighter rounds start to struggle.
Proof designed these to thread on, torque down to spec (their guidance runs in the 65 to 75 ft-lb range), and confirm with headspace gauges before you shoot. Plenty of folks handle it at home with a barrel vise, action wrench, and go/no-go gauges, though a gunsmith is a smart call if you don't own the tools or your action has been trued. It's a straightforward upgrade with a payoff you'll feel the first time you pick the rifle up and the first time you look at your groups.
Not necessarily. These prefits arrive chambered and threaded, so many owners install them at home with a barrel vise, action wrench, and go/no-go headspace gauges, then torque to Proof's recommended 65 to 75 ft-lbs. If you don't have those tools, or your action has been trued or had lug work, a gunsmith is the safer route.
It comes in a 1:7.5 twist, which is on the fast side and made to stabilize the long, heavy, high-BC bullets the 6.5 PRC is known for. That means the 140-plus grain match and hunting projectiles run true, giving you flat trajectories and strong wind performance at distance.
Proof's carbon fiber-wrapped barrels run up to 64 percent lighter than a comparable steel barrel of similar contour. Beyond the weight savings, the carbon wrap sheds heat better, which helps keep your point of impact steady during longer strings of fire.
It's built for the Tikka T3 and T3x actions and is also compatible with the Sako M85. It's designed to headspace correctly on factory-spec Tikka actions, though if yours has been modified you'll want to verify headspace before shooting.
| UPC | 843068119693 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 119693 |
| Length | 22'' |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.