$1,149.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Proof Research built its name on taking a proven steel barrel and wrapping it in carbon fiber without cutting any corners on the machining underneath, and this Sig Cross prefit is a good example of that approach. It's chambered for .22 Creedmoor, cut to 20 inches, and finished with a 1:8 twist and 5/8-24 muzzle thread, so it's ready to bolt onto a compatible Cross action right out of the box. At 2 pounds 9 ounces, it comes in noticeably lighter than a comparable steel barrel of the same length, which matters if you're carrying this rifle any real distance.
Every Proof barrel, carbon or steel, starts from the same match grade 416R stainless steel blank, drilled and single point cut rifled, then lead lapped for a consistent bore. For this prefit, that reduced contour blank gets wrapped in a helical pattern of aerospace grade carbon fiber and cured with Proof's proprietary resin. That fiber orientation is what lets heat move down the length of the barrel instead of pooling in one spot, so it cools faster between strings and holds its zero better once it warms up.
.22 Creedmoor is a necked down 6.5 Creedmoor built around 0.224 diameter bullets, and it's earned a following for staying flat and resisting wind drift at distance. Stretching the barrel to 20 inches over the Cross's factory 16 or 18 inch offerings gives that round more room to build velocity, and the 1:8 twist is set up to stabilize the heavier for caliber match bullets that make the cartridge worth running in the first place.
The barrel ships with the extension needed to mate up to the Cross action, which is the whole point of a prefit system. There's no chambering or gunsmith fitting required on your end since Proof already handled the headspacing at the factory. It still pays to double check torque specs and give the action a once over before you start shooting, but this is about as close to a true drop in barrel swap as you'll find for the platform.
It arrives chambered, threaded, and headspaced for the Cross action, so it's designed to bolt straight on without a custom fitting job. The included barrel extension handles the connection to your action. Most owners can swap it themselves, though a quick torque check never hurts.
Both start from the same 416R stainless blank and go through identical rifling and lapping, so accuracy potential is on par between the two. The carbon wrap on this barrel cuts weight substantially and helps the barrel shed heat faster during longer strings. If you're hunting or hiking with the rifle, that weight savings is the main draw.
The cartridge is known for a flat trajectory and solid resistance to wind drift, and stretching the barrel to 20 inches gives it more room to reach its intended velocity compared to the Cross's shorter factory options. The 1:8 twist on this barrel is matched to stabilize the heavier .224 bullets typically loaded for this round.
Proof Research has flagged that some Copper Creek Cartridge Co .22 Creedmoor factory ammunition runs at higher than standard pressures, so it's worth sticking to loads that match your barrel's chamber spec. Beyond that, treat it like any other precision barrel: let it cool between strings and keep it clean for the best accuracy life.
| UPC | 843068139264 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 139264 |
| Barrel Length | 20" |
| Caliber/Gauge | .22 Creedmoor |
| Product Type | Accessory-Barrels |
| Shipping Weight | 0.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.