$999.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Proof Research built its name on one idea: cut the weight of a rifle barrel without touching the accuracy. This 18-inch .308 Win AR-10 barrel is a textbook example. It starts life as a full-profile, match-grade 416R stainless blank, gets single-point cut rifled and hand lapped, then turned down to a slim contour and wrapped in high-strength, aerospace-grade carbon fiber set in Proof's own proprietary resin. The end result tips the scales at roughly 2 pounds 9 ounces and runs up to 64% lighter than a steel barrel of similar profile, which is a big deal on a platform that usually carries a lot of weight out front.
The wrap is not just about saving ounces. Carbon fiber pulls heat out through the wall of the barrel and spreads it along the length, so this barrel cools quicker than steel and holds its point of impact deep into a shooting session. That means fewer flyers when the barrel gets hot and a longer service life overall. The 1:10 twist is a smart middle-ground for .308, stabilizing everything from lighter match loads up through the heavier 168 to 175 grain bullets most precision shooters lean on.
This is a .875 gas journal with a rifle-length gas system and a 5/8×24 threaded muzzle, so it plays nice with the brakes, comps, and suppressors you already own. The 5-groove bore and .093 port round out the spec sheet. Because it comes chambered and threaded but not headspaced to your bolt, plan on a gunsmith or a careful home build with proper headspace verification before you send rounds. It fits standard DPMS-pattern AR-10 receivers and works great as the centerpiece of a lightweight designated marksman rifle, a backcountry .308, or a precision gas gun that you actually want to carry.
If you have been chasing a lighter AR-10 without dropping down to a budget barrel, this is the kind of upgrade that changes how the whole rifle handles.
Proof Research rates the carbon fiber wrap at up to 64% lighter than a steel barrel of a similar contour, and this one weighs in around 2 pounds 9 ounces. On an AR-10, where weight tends to pile up at the muzzle, that shift makes the rifle noticeably better balanced and easier to carry or run offhand.
Yes. Under the carbon wrap sits a match-grade 416R stainless barrel that is single-point cut rifled and hand lapped, the same process Proof uses on its full steel barrels. The carbon fiber sheds heat efficiently, which helps the barrel hold its point of impact and accuracy through longer strings of fire.
The 1:10 twist is a versatile choice for .308 Winchester and stabilizes the popular 168 to 175 grain match bullets well, along with lighter hunting and range loads. It is the twist rate most precision .308 shooters reach for when they want one barrel that does it all.
It comes chambered and threaded with a 5/8×24 muzzle and a .875 gas journal for a rifle-length gas system, so it fits standard DPMS-pattern AR-10 receivers. It is not headspaced to your specific bolt, so plan on a gunsmith or a careful home build with proper headspace checked before firing.
| UPC | 843068100028 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100028 |
| Barrel Length | 18'' |
| Length | 18'' |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.