Description
For anyone cleaning a .17 or .177 caliber rifle, the small bore diameter leaves zero room for a wobbly, flexing rod. This Pro-Shot one-piece rod solves that with a rigid 32.5" stainless steel shaft that runs straight through the bore without buckling, and it ships ready to work with a brass .17 caliber spear-point jag and a reusable clear storage tube.
What Sets the Pro-Shot Micro-Polished Rod Apart
The standout here is the finish. Pro-Shot runs their rods through an exclusive burnishing and centerless grinding process that leaves a dense, mirror-like jeweled surface. That polish matters more than it sounds. A smooth, hardened rod won't trap the grit, carbon, and fouling that a rougher rod would drag back and forth through your bore. The stainless is intentionally kept a touch softer than barrel steel, so it holds up to modern bore solvents without deteriorating while staying gentle on the rifling.
Handle Design and Bore Care
One detail folks appreciate is the free-spinning handle. It lets the rod rotate on its own axis as you push through, so your patch or brush spirals right along with the rifling and reaches into the grooves. Precision and benchrest crowd tend to gravitate toward one-piece rods for exactly this reason, and Pro-Shot has a long-standing reputation among accuracy-minded rifle owners. Pair it with a bore guide and you've got a setup that keeps the rod off the bore and centered where it should be, which is the whole point of upgrading from a multi-piece kit.
Fit and Threading on the .17 Cal Rod
The 32.5" measurement is working length, not counting the handle, so it clears most standard rifle barrels with room to spare. The tip uses a 5-40 thread pattern, which is the small-bore standard for .17 and .20 caliber accessories, meaning jags, brushes, and mops in that thread size will thread on snug with no wobble. It's a buy-once piece of kit that earns its place in the cleaning bench.
Key Specifications
- Manufacturer: Pro-Shot
- MPN: 1PS-32-17
- UPC: 709779400317
- Caliber: .17 / .177
- Working Length: 32.5" (not counting handle)
- Rod Type: One-Piece
- Material: Micro-Polished Stainless Steel
- Thread Pattern: 5-40
- Handle: Free-Spinning / Rotating
- Suitable For: Rifles
- Quantity: 1
- Made In: USA
What’s Included
- One-piece 32.5" micro-polished stainless steel cleaning rod
- Brass .17 caliber spear-point jag
- Reusable clear plastic storage tube
Frequently Asked Questions
Will this Pro-Shot rod work for both .17 and .177 caliber?
Yes. This rod is sized for the .17 caliber bore, which covers .177 as well, including small-bore rifles and air rifles in that diameter. Just make sure any jags, brushes, or mops you add match the 5-40 thread pattern used on small-bore accessories.
Is a stainless steel rod safe for my rifle bore?
It is. Pro-Shot builds these from a stainless that is intentionally kept softer than barrel steel, so it won't damage the rifling, and the micro-polished finish resists picking up the abrasive grit that actually causes bore wear. Running it through a bore guide keeps the rod centered and off the barrel for the safest possible cleaning.
Why choose a one-piece rod over a multi-piece kit?
A one-piece rod stays rigid and won't flex or buckle the way segmented rods can, and there are no threaded joints in the middle to trap grit or work loose inside the bore. Many precision and benchrest rifle owners consider a quality one-piece rod like this one the standard once they've used it. The tradeoff is portability, so a multi-piece kit still has its place in a range bag.
Does the 32.5" length include the handle?
No, the 32.5" is the working length of the rod itself, measured without the handle. That gives you plenty of reach for standard rifle barrels chambered in .17 with room to spare on either end.




Reviews
There are no reviews yet.