0
0

POF Dictator 9-Position Mid-Length Adjustable Gas Block (.223/5.56)

UPC: 847313008381

$134.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who's shot a suppressed AR knows the deal: back pressure climbs, the bolt carrier speeds up, and suddenly your gun is spitting gas and carbon back into the action while wearing parts out faster than it should. The POF Dictator gives you a way to shut that down. It's a 9-position adjustable direct-impingement gas block that lets you meter exactly how much gas reaches the action, so you can run your rifle at the minimum needed to cycle reliably instead of drowning it.

Why the Dictator Runs a Straight Gas Tube

Most gas blocks use a bent tube, and that bend is where heat likes to pile up. POF designed the Dictator with a straight tube instead, which keeps things cooler and helps the whole gas system last longer. That matters most on suppressed and high-volume guns that see a lot of heat, but it's a nice bonus on any build. The tube is already matched to the block and set up for a mid-length gas system, so you're getting a complete assembly rather than sourcing parts separately.

Dialing In Your Dictator

The adjustment dial sits on the front face of the block, and you've got three ways to turn it: a flathead screwdriver, a 3/32" hex wrench, or the dictation tool POF includes in the kit. Front access means you can tune it through the end of a free-float handguard, and once you find your setting you're done chasing buffer weights and springs. Whether you're softening recoil for a match gun or cutting down gas on a can build, the tuning happens right at the block.

Fitment Notes Before You Buy

The Dictator is built for barrels with a .750" gas block journal and clamps down with a pair of set screws at the 6 o'clock position. One thing worth knowing: this is a taller block than a bare low-profile unit, running right around 1.57 inches in overall height. It needs a rail channel of about half an inch or greater, so measure your handguard's inside clearance before ordering to make sure it'll tuck under cleanly. It's made for standard DI guns and isn't meant for piston systems.

Key Specifications

  • Manufacturer: Patriot Ordnance Factory (POF-USA)
  • Manufacturer Part Number: 00838
  • UPC: 847313008381
  • Model: Dictator Adjustable Gas Block
  • Caliber: .223 Rem / 5.56 NATO
  • Gas System Length: Mid-Length
  • Type: Adjustable Direct Impingement Gas Block
  • Positions: 9-Position Adjustable
  • Gas Block Journal: .750"
  • Gas Tube: Straight (Mid-Length, Included)
  • Overall Height: Approx. 1.57"
  • Minimum Rail Channel: 1/2" or greater
  • Mounting: Two set screws at 6 o'clock

What’s Included

  • POF Dictator 9-position adjustable gas block
  • Mid-length straight gas tube
  • Dictation adjustment tool
  • Set screws

Frequently Asked Questions

Will the Dictator gas block fit under my handguard?

It requires a rail channel of about 1/2 inch or greater to clear, and it runs taller than a bare low-profile block at roughly 1.57 inches overall. Measure the inside height of your free-float handguard before ordering, since some tighter rails won't clear the top edge. If you're on a slim handguard, double-check that clearance first to avoid surprises.

Do I need a special tool to adjust the Dictator?

No. The adjustment dial on the front of the block accepts three tools: a standard flathead screwdriver, a 3/32" hex wrench, or the dictation tool that comes in the kit. Because the dial faces forward, you can tune it right through the front of a free-float handguard without pulling anything apart.

Does this work with a suppressor?

That's exactly what it's built for. Suppressors add back pressure, which speeds up the bolt carrier and dumps extra gas and carbon into the action. Dialing the Dictator back lets you cut the gas down to what the rifle actually needs, reducing wear and keeping things running cleaner when the can is on.

What barrels is the Dictator compatible with?

The block is sized for barrels with a .750" gas block journal, which covers most standard AR-15 barrels. It's set up for mid-length direct-impingement gas systems and includes the matched straight gas tube. Keep in mind it's not designed for piston-driven rifles.

Additional information

UPC

847313008381

Manufacturer

Manufacturer Part Number

00838

Length

15

Model

Package Height

1.5

Package Width

5.5

Product Type

Gas Block

Shipping Weight

0.4

Reviews

There are no reviews yet.

Be the first to review “POF Dictator 9-Position Mid-Length Adjustable Gas Block (.223/5.56)”